Quote Originally Posted by aussie-revhead View Post
I will test it when I can , but at 1.3v in bios I get 1.33v loaded so it rises but not 0.1v at this voltage .

Yes I get that driver reset thing when it crashes - nv failed to repond - or something to that effect - please restart pc to regain full function . This is sometimes accompanied by display resolution setting itself to 640x480 .

How can I futher reduce loaded temps ? Im using a dedicated gpu loop with 1x360 rad , EK full block and a little DB-1 pump . I was told a bigger pump wont reduce temps .

Where can I find the OCP mod for these ? Is it hard to do / worth doing ?

I don't know that pump but if it's very weak it might help to replace it.

You can try some more powerfull fans on the rad.

How's the contact with the block and what thermal compound did you use?

Also, a cooler ambient helps.

Today i ran 3d mark 01 and 06 at 1.35Vgpu with the stock cooler at 881 core 2125 shaders and 1130 memory, so that's looking good.

Aiming for 900/2200/1150 with watercooloing though.