Phenom 9500 w/ MSI K9A2 Platinum

[KTE]

Nice. Post the OC results of the 9600 BE when you can.

I've got a Q6600 G0 here that I may compare sooner or later... depending on if the BE is not a dud oc'er, i.e. reaches above what my 9500/9600 could reach. Already have E6750, 5000 BE, 9500 controlled test results to go along with them.

Report: Is not correct, especially stating 2.0V, that's a little too low to be precautios about. AFAIK, a very small minority of Phenoms have had this problem and it's been when you leave VCore very low and increase DRAM voltage to high. Still, we've had little to no information or confirmation from those users when asked to explain, so we can't base much off it. I've ran 2.2V and others have ran 2.4-2.1V ever since we bought Phenom (2 months in my case), and I've even ran 2.4V for 2 days and 2.9V for 30 odd minutes (some screenhots in the other "high Phenom voltage" thread). I know Sami runs 2.2V-2.3V regular with Phenoms too. There's no way I can say 2.2V has any issues with Phenom. About higher than that, I'm not too sure based on what a few have said (dead CPU) but I've certainly had no problems with 3 different Phenoms that I've tried so far. I'll post 9600 BE running at DDR2 >1066 2.2/2.3/2.4V soon. If BE can go higher on HT ref., I'll try for >2.4V and some CAS3 CAS4 at high clocks.