Water Cooled Case Gallery

[iandh]

Window looks extremely professional, excellent job, Iandh. I'm surprised you don't use your own 8800GT RAM sinks in your build though!

Haha, actually I need to order some more tubing so that I can put my Accelero and ramsinks back on. I redid my loop and cut things too short, and ended up having to remount the stock cooler. They're sitting here on my desk getting dusty but I probably won't get around to it until I get some more orders filled.

[Junkee]

Hello All

i have been reading the threads on XS for the past few months now and all your cases has inspired me soo much that i desided to join the site...

sorry to bring up the Murderbox again but it was the main case that inspired me... just one of the many questions i have about it is.... how do you mount the 3 Hard Drives verticly in the 5.25" drive bays as you can see in the top left hand corner of this pic below??

thanks in advance

[dnb#]

Take a screwdriver and turn to the right to tighten, left to loosen the bits.

[Origin_Unknown]

Take a screwdriver and turn to the right to tighten, left to loosen the bits.

[Junkee]

Thanks guys really helpfull

im trying to ask what brackets are used?

[kinghong1970]

i'd think any bracket that enables you to mount a HDD in a 5.25 bay should do...

you're probably going to drill anyways, you will want to mount 3 HDD vertically, no? kinda waste of space to mount only 2 there...

[Bei Fei]

[taylormsj]

Bei Fei that is one nice set up, what are you using as a bracket for the radiator?

[Bei Fei]

I made the bracket on a plasma CNC machine.

[taylormsj]

DAMN YOU, very nice build, what fans are you using?

[Bei Fei]

DAMN YOU, very nice build, what fans are you using?

Yate Low speed

[binormalkilla]

I made the bracket on a plasma CNC machine.

Wow.....that's awesome! Sure does beat the old Radbox that I have.......it's currently holding up my 480GTX

[Bei Fei]

Here are some pics of the unfinished bracket.... This one is scrap because I bent the thin part wrong.

[binormalkilla]

Here are some pics of the unfinished bracket.... This one is scrap because I bent the thin part wrong.

Depending on your ability to sem-mass produce, you might want to consider selling some to Petras tech or something....there is a definite need for rad mounting solutions, and that one is superior to the Swiftech Radbox in many ways.....

[Sta!nless]

Depending on your ability to sem-mass produce, you might want to consider selling some to Petras tech or something....there is a definite need for rad mounting solutions, and that one is superior to the Swiftech Radbox in many ways.....

Agreed. I'd be interested in one too.

[Nate P.]

Yep, you definitely got a customer over here.

[g1raffe]

Thats a nice bracket, much better than the Radbox I am using, the Radbox barely gives me room for DVI cables into the GFX card..

[Mxlplx]

lichyetan, im just curious about your nb block, is it custom made or you just modified it, sorry new to w/c'ng 1st time ive seen a block w/ a heatpipe.

[Lloyd]

lichyetan, im just curious about your nb block, is it custom made or you just modified it, sorry new to w/c'ng 1st time ive seen a block w/ a heatpipe.

It looks like an Asus Fusion block that comes as standard with high end Asus motherboards.
I have a similar thing on my Asus Maximus Extreme...

[Nate P.]

It looks like an Asus Fusion block that comes as standard with high end Asus motherboards.

I've only ever seen it on they Maximus and Blitz lines.

[Mxlplx]

It looks like an Asus Fusion block that comes as standard with high end Asus motherboards.

yeah, possibly removed the heatsink fins that made me a little confused and looked custom made.

[lowfat]

My sweet setup

[disruptfam]

I like that tubing lowfat???

what is it??

[lowfat]

Primoflex. I don't generally use it. Too big. I just have quite a bit left.

EDIT: The bend radius of the stuff is great. Sure beats the Tygon R3603 3/8in 1/2od stuff i just bought.

[Patriote]

Keep them coming guys! I see a lot of nice builds lately!