Big Mama LN2 Dewar arrival party E6850 + Gigabyte X38 + Corsair PC10K = 5.35Ghz 2D/3D

[dinos22]

yeah i'm thinking of always having it filled up with LN2 so that i never have to run out if the urge is there

but yeah i'll keep an eye out some more

my ln2 delivery guy told me it's also better to have these filled with LN2 even if not much is in there because if they get emptied and warm up and then you keep cooling them down the top neck area on the inside starts to crack from stress

[The0men]

yeah i'm thinking of always having it filled up with LN2 so that i never have to run out if the urge is there

but yeah i'll keep an eye out some more

my ln2 delivery guy told me it's also better to have these filled with LN2 even if not much is in there because if they get emptied and warm up and then you keep cooling them down the top neck area on the inside starts to crack from stress

Well I know I would listen to the guy makes sense anyway.

Plus that way you know its nice and cold for next time you want to go, and like you say, it may be worth keeping it full.

Hey man if you dont mind me asking whats it worth for dewar and to fill it?

[dinos22]

Hey man if you dont mind me asking whats it worth for dewar and to fill it?

if you live in Sydney i'll hook you up with a guy that charges me $62 delivered for 34L EEK

[The0men]

O thats not as expensive as I thought. Not planning on really using any, was just curious how much it cost's. I'm from melb, but I see a little l2n VAN mostly on the way home from work. I guess if I ever got some pots, and got keen I'd just give that guy a bell. I was just curious as to what it's worth.

[dinos22]

O thats not as expensive as I thought. Not planning on really using any, was just curious how much it cost's. I'm from melb, but I see a little l2n VAN mostly on the way home from work. I guess if I ever got some pots, and got keen I'd just give that guy a bell. I was just curious as to what it's worth.

can you please give that guy a bell so we have a melbourne contact in case any of the Xtreme guys need a good supplier

or just get the details and we'll call him

[The0men]

Yer no probs, next time I see the little van I'll take the number and give him a bell.

[dinos22]

i've got a chip capable of 650MHz FSB just trying to get a voltmod for vcore and OVP now for P5E3 DLX and figure out how the i downgrade the bios to 0504 so that i can run slightly better RAM speeds and 1T on DDR3

it should be good on LN2

i REALLY want to do some SuperPi damage here
http://www.hwbot.org/quickSearch.do?...%29+%284139%29

[Oliver]

i've got a chip capable of 650MHz FSB just trying to get a voltmod for vcore and OVP now for P5E3 DLX and figure out how the i downgrade the bios to 0504 so that i can run slightly better RAM speeds and 1T on DDR3

it should be good on LN2

i REALLY want to do some SuperPi damage here
http://www.hwbot.org/quickSearch.do?...%29+%284139%29

Sounds good about your dewar.

Lookin forward to some SPI damage .

Keep pushing it.

[dinos22]

tested 575MHz superpi stable MHz on the chip on water so looking good for about 625MHz cold benches and another 10-15Mhz for screens it seems

we'll see

[n3wbi3]

can you please give that guy a bell so we have a melbourne contact in case any of the Xtreme guys need a good supplier

or just get the details and we'll call him

If u dont mind passing that number on, it will be helpfull

[dinos22]

If u dont mind passing that number on, it will be helpfull

hehe at least one Melbournian ready to pounce
you get your new KP pot?
he's making a new batch of F1s soon

[n3wbi3]

lol

Nah not yet buddy, i seen his extreme version which i might say
just playing the waitng game for the high end cards to come out so then i can start some benching, plus new yrs and christmas just passed which put a huge hole in my pocket lol

[dinos22]

hehehe i can understand that

Vince is sending over the new F1 EE my way for some LN2 pwnage

[The0men]

lol

Nah not yet buddy, i seen his extreme version which i might say
just playing the waitng game for the high end cards to come out so then i can start some benching, plus new yrs and christmas just passed which put a huge hole in my pocket lol

Where abouts in melb are you n3wbi3 (sorry dinos for attempted hijacking thread lol)

Man I just got my new watercooling gear. I decided I might get some cable management and tidy it up aswell.. Plus getting this tripple rad to fit in the front of my armor might be a bit tricky.

Anyway, I better gat back to it, got a fair job on my hands.

[Timbosan]

left the dewar for 8-9 days and after checking the level i only saw about 1-1.5cm LN2 drop

that's pretty good
really happy with that actually

thats not bad, here at work we have large 200L dewars of LN2, and also the smaller ones like yours. The smaller ones (if the stopper is good) will hold for ~2 weeks with ~1cm drop. Yours is not bad though.

And yes its better to not let it be fully emptied and warm up - even just a cm or 2 in the bottom - heating/cooling stress isnt good for the inner lining.

[dinos22]

thats not bad, here at work we have large 200L dewars of LN2, and also the smaller ones like yours. The smaller ones (if the stopper is good) will hold for ~2 weeks with ~1cm drop. Yours is not bad though.

ZOMG
where do you work
can i work there too
they wouldn't mind if i bring in some gear for testing at lunchtime would they

[n3wbi3]

hehehe i can understand that

Vince is sending over the new F1 EE my way for some LN2 pwnage

so so so tempted to send him a quick email to order 1 as well mmmmmmmm thinking .....

cant wait to see some pics mate

Where abouts in melb are you n3wbi3 (sorry dinos for attempted hijacking thread lol)

port melb buddy, next to the city, ur self?

[The0men]

so so so tempted to send him a quick email to order 1 as well mmmmmmmm thinking .....

cant wait to see some pics mate

Where abouts in melb are you n3wbi3 (sorry dinos for attempted hijacking thread lol)

port melb buddy, bext to the city, ur self?

Down on the mornington peninsula lol. Somers. Kinda rural town. Take it easy.

[Timbosan]

ZOMG
where do you work
can i work there too
they wouldn't mind if i bring in some gear for testing at lunchtime would they

Uni - Chemistry department

got so much LN2 and DICE i really should do some sub zero benching. i have a pot....its crap though & i know nothing about insulating things. id kill everything lol. It sucks when none of your mates are into overclocking.

[dinos22]

Uni - Chemistry department

got so much LN2 and DICE i really should do some sub zero benching. i have a pot....its crap though & i know nothing about insulating things. id kill everything lol. It sucks when none of your mates are into overclocking.

errrrr please tell me you're from sydney

[n3wbi3]

even better please say ur from melb.....
DINOOOOO hands off his mine lol

[Timbosan]

errrrr please tell me you're from sydney

only about one hour south-er (depending on who's driving lol). Im from Wollongong. Where are you at?

even better please say ur from melb.....
DINOOOOO hands off his mine lol

lol i wish i lived near people who do this stuff. im probably like the only person in wollongong who owns a conroe system lol

[dinos22]

lol sydney (hurstville)

yeah 1hr to wollongong sounds reasonable hahahah

[Timbosan]

lol sydney (hurstville)

yeah 1hr to wollongong sounds reasonable hahahah

mad your so close. Next time somethings going on we should meet up or something, or we should just hang out & have beers & OC thats if you would permit a n00b like myself anywhere near you of course lol.

[n3wbi3]

Bugger still looks like ill br driving to my local B.O.C shop.

Dino free ln2 and dice and all u have to do is teach him how to insulate and bench, sounds like fair deal to me

Timbosan: u could always move to melb