Good design, good overclock, good pipe-The MSI P35 Neo2-FR overview

[ownage]

I just got this board after Christmas and Revision 1.1 came with bios 1.1.
I went on to overclock E6600 without flashing the bios. Well the board' s revision mattered to me more than the bios but I will have to flash the bios when new line of 45 nm processors come out. Anyways, I uped the fsb to 378.
378 X 9 = 3402 mghz vcore was @ 1.3 but It was not prime95 stable.
I ran more tests upping the voltage and It seems like my E6600 is stable @ vcore 1.3750 when running @ 3402 mghz. I wish bios had an option to change NB and SB voltages.
I am running my 2gb crucial ballistix PC8500 at 756 3-3-3-12 @ 2.1 vcore ( low speed cuz i prefer running RAM 1:1 with the processor)

As for the temperature, my room temp is around 75'F right now
and My E6600 running 3402mhz @ 1.375 vcore idling @ 32/33'c
and when under load (prime95 FTT) @ 57'c. I use Zalman 9700 led air cooler.

I am very satisfied with this board overall. price was only 100 bucks after $20MIR so I have no complaints.

This board has NB and SB voltage options

Does someone use MSI Dualcoe center? I can't get it to work.