A Positive Look at the Antec Nine Hundred (900) Case

**velebrz** · 01-03-2008, 04:57 AM

is it possible to remove the 2 front vents and screw in a WC rad with fans ? and if anyone with experience can say, whats this case like with a WC setup

thx in advance

**Brian MP5T** · 01-03-2008, 03:43 PM

^^^ LOL Floppy..

**|UgX|vibe** · 01-04-2008, 09:29 AM

well.. I have a crap load of floppys from years ago with pictures that Im too lazy to change over..

**smsmasters** · 01-04-2008, 01:21 PM

**Brian MP5T** · 01-04-2008, 01:56 PM

^^ Mess of wires above the HDDs...

**Power5** · 01-04-2008, 01:56 PM

What makes the mobo so bright around the ram? Looks like there is lights on the ram, but the mobo is bright right there. Is that the only light for that area?

**smsmasters** · 01-04-2008, 02:12 PM

Originally Posted by Brian MP5T

^^ Mess of wires above the HDDs...

By the way, the HDs are on the bottom cage :P. I was in a rush and will use cable ties next time

**smsmasters** · 01-04-2008, 02:13 PM

Originally Posted by Power5

What makes the mobo so bright around the ram? Looks like there is lights on the ram, but the mobo is bright right there. Is that the only light for that area?

The ballistix tracers RAM have white leds which light up the mobo too.

**hitek420** · 01-04-2008, 03:39 PM

I hate reading this thread, I want my parts back from RMA so I can have blue waffle patterns on my bedroom wall and my blinky ram lights again

Maybe I'll build my old A64 system up in my 900 just for fun and to see how the 900 cools compared to my old trusty Antec SX1040b, I love that old case... I got it with my long gone Athlon XP 1500+/gf3 ti200 and I bet I'll have it to put my q6600 in when I build a new system lol.

**hitek420** · 01-04-2008, 03:44 PM

Oh, and I wonder if they will offer a version of the 200mm tricool with the led lights. I should also try to find 3 more 120mm tricools with the leds for my side panel and the two 120s on my heatsink.

/me exits overkill mode

**Brian MP5T** · 01-04-2008, 06:28 PM

Originally Posted by smsmasters

By the way, the HDs are on the bottom cage :P. I was in a rush and will use cable ties next time

Technically "Above" can by definition be any part in the Positive Y axis away from the HDD...

**Brian MP5T** · 01-04-2008, 06:29 PM

Originally Posted by hitek420

Oh, and I wonder if they will offer a version of the 200mm tricool with the led lights. I should also try to find 3 more 120mm tricools with the leds for my side panel and the two 120s on my heatsink.

/me exits overkill mode

I have several 120mm Antec fans... Where in Canada are you..

**jaberocs** · 01-04-2008, 10:10 PM

just for my clarification, 3 SATA power connectors on 1 power cable would provide enough juice for the hard drives? just making sure.

thanks in advance.

**Brian MP5T** · 01-05-2008, 03:41 AM

Originally Posted by jaberocs

just for my clarification, 3 SATA power connectors on 1 power cable would provide enough juice for the hard drives? just making sure.

thanks in advance.

Yes

**(+[ ]:)** · 01-05-2008, 07:28 AM

Wow Butifull Wireing I Love It Very Very Very Good Job Mate 2 Thumbs Up On That One

**Moe_Szyslak** · 01-06-2008, 10:24 AM

Question,

How can I get the top (with the 200mm fan) off? Can it be done without having to remove other parts of the case? I tried a few things but the damn thing won't budge. I want to flip the fan to make it an intake instead of an exhaust. The build is already done and I don't want to go through the hassle of removing all the hardware from the case just to flip the fan.

Thx

**deees** · 01-06-2008, 11:38 AM

Originally Posted by Moe_Szyslak

Question,

How can I get the top (with the 200mm fan) off? Can it be done without having to remove other parts of the case? I tried a few things but the damn thing won't budge.
Thx

http://www.xtremesystems.org/forums/...&postcount=164

**Moe_Szyslak** · 01-06-2008, 11:57 AM

Originally Posted by deees

http://www.xtremesystems.org/forums/...&postcount=164

Perfect

Thanks

**DoNER90** · 01-09-2008, 11:31 AM

Originally Posted by velebrz

is it possible to remove the 2 front vents and screw in a WC rad with fans ? and if anyone with experience can say, whats this case like with a WC setup

thx in advance

I did the what you said in your post , I took long case screws then drilled two holes in the black plastic fan shroud then taped the rad from their though the fan's with the long screw , its hard to explain but it does work and its the only way I found to work. if you get a WC setup for the case make sure your pump is small.

**boardonwheels** · 01-09-2008, 07:48 PM

Were can I get those SATA power connectors that you clip onto the cable?

**cloned** · 01-09-2008, 09:41 PM

Originally Posted by boardonwheels

Were can I get those SATA power connectors that you clip onto the cable?

try performance-pcs.com i think i saw some of those in there connector sections

**boardonwheels** · 01-10-2008, 09:29 AM

Originally Posted by cloned

try performance-pcs.com i think i saw some of those in there connector sections

I couldn't find any.

**boardonwheels** · 01-10-2008, 12:42 PM

I found some here for $1.19 each.

**deees** · 01-10-2008, 02:54 PM

What color did you want? Performance-pcs carries them, but they're sold-out of the black ones.

http://www.performance-pcs.com/catal...oducts_id=1220

FrozenCPU carries them, and they're in stock, and cheaper.

http://www.frozencpu.com/products/17...Z92N&mv_pc=804

**boardonwheels** · 01-11-2008, 09:23 AM

Thanks deees. I like that frozencpu link because I was looking for the push down type. Color doesnt mater since they wont be seen.

Thread: A Positive Look at the Antec Nine Hundred (900) Case

Thread Tools

Search Thread

Rate This Thread

Display

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions