Quote Originally Posted by T_M View Post
To avoid some possible missunderstanding:

OVP = Over voltage protection (typically if you reach this point the system will freeze/reboot even with no load)
OCP = Over current protection (typically if you reach this point the system will freeze/reboot only under load)

On G92 8800GTS, what we see is likely (i havent tested) to be OCP, which kicks in around 1.6V and high clocks under load.
This is not the idle voltage however, due to overvoltage under load, so you actually can only max out your voltage to about 1.5-1.525V idle.
Hi guys , T_M - in regards to the information you showed me above , I have volt modded and water cooled my G92 GTS and it has responded very nicely , but as soon as I push vgpu above 1.45v I get gpu lockup in 3D06 , I can escape out of it most of the time and it will recover but it doesnt respond to more voltage , if anything it gets more unstable , is this OCP kicking in ?

I can bench up to 900 core 2250 shader and 1150 mem at 1.4vgpu , is this good ? I managed to score 17887 in 3D06 with my main goal to break into the 18k range but this issue seems to have halted my progress , unless I go back and try to get some more out of my cpu but its not a special one and will only bench to 9x435=3915mhz .

Any input would be great.