Phenom 9500 w/ MSI K9A2 Platinum

[KTE]

hey KTE, check your PM

Thanks as always macci.

Hi all

I'm using the performance bios P0D, and I can'd setup NB>9 without messing all reading in windows HT<200 and so on, it's possible for you to share the E version?

Hi. That's always been the case with every BIOS with locked Phenoms AFAIK. I've not seen any multi higher than 9x on any board with Phenom yet (without lower clock readings and no real NB change, same as CPU multi higher than stock would show). It looks like it's just not possible.

I would like to test that bios, if it can set NB multi > 9 with 9500 CPU.

ps: macci you got beta bios, erm could be pleasure down here ?

Both of you will have PMs soon.

my max ht were 251 with boxed and +22 c' ambient temp and opening case + window (-8c' air directly to pc) idle did go down by 16 c' and my max ht wall raised to 261

So you had a temperature problem?
I've never had any difference with Phenom @ 0℃ ambient or 26℃ ambient.

Whats max HT ref. on your board? And what about the Phenom (low multi)?