lol, its a comparison of the before and after. im working on the other one as we speak.Originally Posted by Nate P.
the nice thing is im starting from:
1000 grit dry (10 min )
1500 grit dry (5 min )
2000 grit dry (5 min )
2000 grit w/ 2 micron diamond slurry (10 min)
hand polish with micro fiber cloth soaked in 2 micron diamond slurry (1 cigarette)
Last edited by Exahertz; 01-03-2008 at 08:17 PM.
Current System Build
Designaton:" Rad Hat "
__________________
Flow Order: >> Rad's 1 & 2 in parallel > Res > Pump > CPU > GPU > SB > NB > Mosfet 1 > Mosfet 2 >>
- Mother Board, RAM and CPU:
Mobo: Asus Maximus Formula (SE) BIOS 1207 | CPU: Intel q9650 @ 3.80GHz Vcore 1.272v | RAM: Crucial Ballistix Tracer PC2 8500 4x1GB- Graphics Processor:
GPU: BFG 8800GTX | BFG 8600GT (Quad Monitor Setup)- Hard Drives:
RAID: 2x 74GB Raptors on RAID 0 for OS Drives
- Case and Power Supply:
Case: Antec Case | PS: OCZ ProXstreame 1000W- Water Cooling:
Pump: Swiftech MCP655-B | Rad: Dual Swiftech MCR320's | Fans: 6x Yate Loon D12SH-12's (W/ Variable RPM Rheostat) @ 88CFM Max Each - 528CFM Total!!!- (Water Blocks and Fittings):
CPU: D-Tek Fusion Block | GPU: Danger Den Full Coverage 8800 Block | Mobo: EK's Mosfet, NorthBridge and SouthBridge Blocks
Res: Swiftech Micro | Tee's: 4x MartinM's High Flow Copper Tee's | Elbow's: None | Y's: None
Temperatures: CPU: 57°C Max, Running Prime95 | GPU: 58.3°C Max, Running 3Dmark | NorthBridge: Untested!
Last Updated 11/11/09
Posting Permissions
Reply With Quote
Bookmarks