Quote Originally Posted by ooeric View Post
got board today. dont understand... C1 error
no post. nothing.

plugged in 4 different ram
ballistix (new)
corsair xms2 (used on non OC pc)
533 1gb kingmax (spare)
533 256 corsair (used to test machines, working)

clear cmos who know how many times already.
ezclear the same

mem slots? tried all slots all arrangements..
still dont understand.. everything else works fine

533's probably will not boot, It's not supported by the board. try 1 stick of your new ballistix. turn on psu wait ten seconds, boot , if no boot try turning of psu again till the light goes out then repeat. there are several different ways people use when confronted with c-1 that method generally works for me. if you don't get a boot try different sticks one at a time.
good luck and keep us posted.


ps: when or if it does boot, get into bios and raise the v-dimm to 2.0 and the memory should be able to boot normally then.