Page 46 of 70 FirstFirst ... 364344454647484956 ... LastLast
Results 1,126 to 1,150 of 1745

Thread: Easynews goes down

  1. #1126
    Hamster Powered
    Join Date
    Apr 2006
    Location
    Virginia, USA [Krunching since 2001]
    Posts
    7,623
    Quote Originally Posted by David_L6 View Post
    Time to buy a wireless router and spread the load throughout the house. I had to do that.
    Time to run a dedicated 20a @120v = 2400w, or 30a @120v = 3600w if you plan on a lot of machines) circuit back to the main panel.

    P
    ------ or PIE
    I | E

    P = Watts
    I = Inductance (amps)
    E = Electromotive Force (volts)

    So I x E = P (watts)
    P divided by E = I
    P divided by I = E
    Last edited by SiGfever; 12-30-2007 at 07:18 PM.
    XSWCG Disclaimer:
    We are not responsible for the large sums of money that you WILL want to spend to upgrade and add additional equipment. This is an addiction and the forum takes no responsibility morally or financially for the equipment and therapy cost. Thank you and have a great day.

    Sigmund Freud said... "Failure to CRUNCH is a sign of Sexual Inadequacies".

  2. #1127
    Mr. Boardburner
    Join Date
    Jun 2005
    Location
    the Netherlands
    Posts
    5,340
    Quote Originally Posted by SiGfever View Post
    Time to run a dedicated 20a @120v = 2400w, or 30a @120v = 3600w if you plan on a lot of machines) circuit back to the main panel.

    P
    ------ or PIE
    I | E

    P = Watts
    I = Impedance (amps)
    E = Electromotive Force (volts)

    So I x E = W
    P divided by E = I
    P divided by I = E
    Us EU guys don't have that problem. We have got 16A x 230V standard

    Is it expensive to install newer and better breakers?
    Main rig:
    CPU: I7 920C0 @ 3.6Ghz (180*20)
    Mobo: DFI UT X58 T3eH8
    RAM: 12GB OCZ DDR3-1600 Platinum
    GPU/LCD: GeForce GTX280 + GeForce 8600GTS (Quad LCDs)
    Intel X25-M G2 80GB, 12TB storage
    PSU/Case: Corsair AX850, Silverstone TJ07

  3. #1128
    Xtreme Enthusiast
    Join Date
    Sep 2005
    Location
    Louisiana
    Posts
    1,039

    Wink

    Quote Originally Posted by Martijn View Post

    Is it expensive to install newer and better breakers?
    It would be inexpensive to switch the breakers for 40 penny nails.

  4. #1129
    Mr. Boardburner
    Join Date
    Jun 2005
    Location
    the Netherlands
    Posts
    5,340
    Quote Originally Posted by David_L6 View Post
    It would be inexpensive to switch the breakers for 40 penny nails.
    OK, change the question. Do you have decent wiring?
    Main rig:
    CPU: I7 920C0 @ 3.6Ghz (180*20)
    Mobo: DFI UT X58 T3eH8
    RAM: 12GB OCZ DDR3-1600 Platinum
    GPU/LCD: GeForce GTX280 + GeForce 8600GTS (Quad LCDs)
    Intel X25-M G2 80GB, 12TB storage
    PSU/Case: Corsair AX850, Silverstone TJ07

  5. #1130
    Xtreme Cruncher
    Join Date
    Dec 2002
    Location
    NW Ohio
    Posts
    3,334
    Wireless router - Check.
    Cat5e through the house and walls - Check. (in most rooms at least)

    I'm on my own 15a circuit, and i only have a few things running lol. 2x quad core rigs, Sammy, xbox 360, clock, lamp, lcd, 5.1 surround and a 8 port switch.



    I've really been debating on finding my own place again. Its just hard to let go of all this money I save (or spend in my case) while living with my parents.
    Last edited by WesM63; 12-30-2007 at 01:54 PM.
    Donate to XtremeSystems!

    Workstation: Intel Core i7 4770, Asus Maximus VI Gene, 32GB Corsair Dominator Platinum DDR3-1866, eVGA SC GTX Titan, 256GB Crucial M4, Corsair HX850, Corsair H100i. Corsair Carbide 350D
    Fileserver: 2x AMD Opteron 2425HE, Supermicro H8DME-2, 24GB DDR2-667, Supermicro 846TQ 24bay Chassis, Redundant 920w, 256 Crucial M4 boot, 20TB Storage
    Notebook Asus Zenbook UX32VD-DH71, Intel Core i7 3517u, 10GB DDR3-1600, 256GB Crucial M4, Geforce GT 620M

  6. #1131
    Registered User
    Join Date
    Nov 2007
    Posts
    20
    Quote Originally Posted by WesM63 View Post
    Wireless router - Check.
    Cat5e through the house and walls - Check. (in most rooms at least)

    I'm on my own 15a circuit, and i only have a few things running lol. 2x quad core rigs, Sammy, xbox 360, clock, lamp, lcd, 5.1 surround and a 8 port switch.



    I've really been debating on finding my own place again. Its just hard to let go of all this money I save (or spend in my case) while living with my parents.

    Live there till they run you off with a shotgun!
    Crunching@ the moment.
    2 mac mini's 1.83 core duo's
    Really amazed by those lil boxes. Stable for a week,non stop @ 100%
    3 ghz p4@3.75ghz
    2.4ghz p4@3ghz
    3ghz pentium d
    3ghz p4
    3ghz p4
    2ghz macbook (melting slowly!)
    2.7ghz celeron
    fx-53 @ 2.6ghz
    2.66 pentium d
    3ghz p4 @3.6

  7. #1132
    Mr. Boardburner
    Join Date
    Jun 2005
    Location
    the Netherlands
    Posts
    5,340
    Quote Originally Posted by =CDU= CNP View Post
    Live there till they run you off with a shotgun!
    Wireless - Check
    Cat5e - Check, double connections in every room, 6 on the attic, 4 in the basement
    Power - 2x16A dedicated, check


    I am going to stay here forever! (because shotguns aren't allowed here )


    To anyone that is moving to a new home: make sure you do the wiring properly the first time. I am really enjoying my network here. It is amazing to be able to have 6 friends coming here with their rigs and then just be able to say: 'plug it into the wall mate'. No wires you can trip over, nothing.
    Main rig:
    CPU: I7 920C0 @ 3.6Ghz (180*20)
    Mobo: DFI UT X58 T3eH8
    RAM: 12GB OCZ DDR3-1600 Platinum
    GPU/LCD: GeForce GTX280 + GeForce 8600GTS (Quad LCDs)
    Intel X25-M G2 80GB, 12TB storage
    PSU/Case: Corsair AX850, Silverstone TJ07

  8. #1133
    Xtreme Legend
    Join Date
    Dec 2003
    Location
    Northern California
    Posts
    204,166
    Good day

    XtremeSystems - 4,535,885

    Easynews - 4,531,284
    Audentes fortuna iuvat

    "Fortune favors the bold"

  9. #1134
    Hamster Powered
    Join Date
    Apr 2006
    Location
    Virginia, USA [Krunching since 2001]
    Posts
    7,623
    Quote Originally Posted by sierra_bound View Post
    Good day

    XtremeSystems - 4,535,885

    Easynews - 4,531,284
    That is very good news.
    XSWCG Disclaimer:
    We are not responsible for the large sums of money that you WILL want to spend to upgrade and add additional equipment. This is an addiction and the forum takes no responsibility morally or financially for the equipment and therapy cost. Thank you and have a great day.

    Sigmund Freud said... "Failure to CRUNCH is a sign of Sexual Inadequacies".

  10. #1135
    Hamster Powered
    Join Date
    Apr 2006
    Location
    Virginia, USA [Krunching since 2001]
    Posts
    7,623
    Quote Originally Posted by Martijn View Post
    Us EU guys don't have that problem. We have got 16A x 230V standard

    Is it expensive to install newer and better breakers?
    It is all about the wire size. You should NEVER install a larger breaker than the wire and the termination lugs can handle .
    XSWCG Disclaimer:
    We are not responsible for the large sums of money that you WILL want to spend to upgrade and add additional equipment. This is an addiction and the forum takes no responsibility morally or financially for the equipment and therapy cost. Thank you and have a great day.

    Sigmund Freud said... "Failure to CRUNCH is a sign of Sexual Inadequacies".

  11. #1136
    Hamster Powered
    Join Date
    Apr 2006
    Location
    Virginia, USA [Krunching since 2001]
    Posts
    7,623
    Quote Originally Posted by Martijn View Post
    Us EU guys don't have that problem. We have got 16A x 230V standard

    Is it expensive to install newer and better breakers?
    16a x 230v = 3680w.
    XSWCG Disclaimer:
    We are not responsible for the large sums of money that you WILL want to spend to upgrade and add additional equipment. This is an addiction and the forum takes no responsibility morally or financially for the equipment and therapy cost. Thank you and have a great day.

    Sigmund Freud said... "Failure to CRUNCH is a sign of Sexual Inadequacies".

  12. #1137
    Moderator
    Join Date
    Mar 2006
    Posts
    8,556
    Quote Originally Posted by SiGfever View Post
    Time to run a dedicated 20a @120v = 2400w, or 30a @120v = 3600w if you plan on a lot of machines) circuit back to the main panel.

    P
    ------ or PIE
    I | E

    P = Watts
    I = Impedance (amps)
    E = Electromotive Force (volts)

    So I x E = W
    P divided by E = I
    P divided by I = E
    ^^^ Hmmm. This is a little mixed up.... SI unit of Impedance is Ohms first off.

    Are you showing Power(Watts) = Current(Amps) x Voltage(Volts) ? Or something else? Cos If you're talking about Impedance we'll have to start talking about reactance, complex equations and Phasors.

  13. #1138
    Hamster Powered
    Join Date
    Apr 2006
    Location
    Virginia, USA [Krunching since 2001]
    Posts
    7,623
    Quote Originally Posted by [XC] riptide View Post
    ^^^ Hmmm. This is a little mixed up.... SI unit of Impedance is Ohms first off.

    Are you showing Power(Watts) = Current(Amps) x Voltage(Volts) ? Or something else? Cos If you're talking about Impedance we'll have to start talking about reactance, complex equations and Phasors.
    Damn Old Timer's...I meant "Inductance".
    XSWCG Disclaimer:
    We are not responsible for the large sums of money that you WILL want to spend to upgrade and add additional equipment. This is an addiction and the forum takes no responsibility morally or financially for the equipment and therapy cost. Thank you and have a great day.

    Sigmund Freud said... "Failure to CRUNCH is a sign of Sexual Inadequacies".

  14. #1139
    Xtreme Cruncher
    Join Date
    May 2007
    Location
    Sydney, AUS
    Posts
    1,148
    Quote Originally Posted by sierra_bound View Post
    Good day

    XtremeSystems - 4,535,885

    Easynews - 4,531,284


    Woohooo. Great news indeed. Good day everyone.

  15. #1140
    Xtreme Cruncher
    Join Date
    May 2007
    Location
    Sydney, AUS
    Posts
    1,148
    Another good day, but the pipped us at the post...


    Results :
    XtremeSystems 16,173
    Easynews 14,899

    Run time:
    Easynews 11:031:09:13:34
    XtremeSystems 4:292:13:16:51

    Points:
    Easynews 4,751,974
    XtremeSystems 4,638,663


    Keep up the great work everyone...this "fight" is really helping the causes!!!!!

  16. #1141
    Xtreme Member
    Join Date
    Aug 2007
    Location
    Sheepstate, USA
    Posts
    162
    I don't think it'll be long before XS is consistently putting out more WU + points than easynews
    but, 2ch is just creaming everybody
    is it law that you must crunch in Japan?
    we need about 800 more people => 2ch
    There are no dangerous weapons, there are only dangerous men. - RAH
    Four boxes to be used in defense of liberty: soap, ballot, jury, ammo - use in that order.

  17. #1142
    Hamster Powered
    Join Date
    Apr 2006
    Location
    Virginia, USA [Krunching since 2001]
    Posts
    7,623
    Quote Originally Posted by Thund3rb1rd View Post
    I don't think it'll be long before XS is consistently putting out more WU + points than easynews
    but, 2ch is just creaming everybody
    is it law that you must crunch in Japan?
    we need about 800 more people => 2ch
    The dedication that Team2CH has shown is very impressive. We WILL catch them one day but they will not go down without a terific fight.
    XSWCG Disclaimer:
    We are not responsible for the large sums of money that you WILL want to spend to upgrade and add additional equipment. This is an addiction and the forum takes no responsibility morally or financially for the equipment and therapy cost. Thank you and have a great day.

    Sigmund Freud said... "Failure to CRUNCH is a sign of Sexual Inadequacies".

  18. #1143
    Xtreme Cruncher
    Join Date
    Jun 2006
    Posts
    612
    do they get more points per result or how do they manage to get more points while returning less work ?
    gentoo amd64/2008.0-beta, gcc-4.2.3, glibc-2.7-r2, kernel 2.6.25 x86_64
    I crunch, and you should too. STATS

  19. #1144
    Xtreme Legend
    Join Date
    Dec 2003
    Location
    Northern California
    Posts
    204,166
    Team 2ch

    Avg. Points Per Result - 344.05
    Avg. Points Per Hour of Run Time - 69.10

    XtremeSystems

    Avg. Points Per Result - 360.09
    Avg. Points Per Hour of Run Time - 90.80
    Audentes fortuna iuvat

    "Fortune favors the bold"

  20. #1145
    I am Xtreme
    Join Date
    Sep 2007
    Location
    New Jersey, U.S.
    Posts
    2,329
    Quote Originally Posted by brot View Post
    do they get more points per result or how do they manage to get more points while returning less work ?
    good question

  21. #1146
    Xtreme Legend
    Join Date
    Dec 2003
    Location
    Northern California
    Posts
    204,166
    Team 2ch

    Total run time - 2,727:336:11:55:05
    Total points - 1,651,194,628

    XtemeSystems

    Total run time - 1,408:070:19:03:50
    Total points - 1,120,130,690
    Audentes fortuna iuvat

    "Fortune favors the bold"

  22. #1147
    Xtreme Legend
    Join Date
    Dec 2003
    Location
    Northern California
    Posts
    204,166
    Points per result is somewhat of a misleading stat. If you crunch mainly short work units, your average may be low. But your average points per hour of run time may still be high.
    Audentes fortuna iuvat

    "Fortune favors the bold"

  23. #1148
    Hamster Powered
    Join Date
    Apr 2006
    Location
    Virginia, USA [Krunching since 2001]
    Posts
    7,623
    Quote Originally Posted by brot View Post
    do they get more points per result or how do they manage to get more points while returning less work ?
    They kill us by the number of members returning work. They are VERY dedicated.
    Last edited by SiGfever; 01-01-2008 at 12:52 PM.
    XSWCG Disclaimer:
    We are not responsible for the large sums of money that you WILL want to spend to upgrade and add additional equipment. This is an addiction and the forum takes no responsibility morally or financially for the equipment and therapy cost. Thank you and have a great day.

    Sigmund Freud said... "Failure to CRUNCH is a sign of Sexual Inadequacies".

  24. #1149
    c[_]
    Join Date
    Nov 2002
    Location
    Alberta, Canada
    Posts
    18,728
    2ch is the largest forum known to exist... they do have superiority in numbers no matter how we look at it lol.

    Doesnt mean we cant put up a fight though

    All along the watchtower the watchmen watch the eternal return.

  25. #1150
    Xtreme Cruncher
    Join Date
    May 2007
    Location
    Sydney, AUS
    Posts
    1,148
    Quote Originally Posted by STEvil View Post
    2ch is the largest forum known to exist... they do have superiority in numbers no matter how we look at it lol.

    Doesnt mean we cant put up a fight though
    And a damn good fight we are putting up indeed

    The competition between these guys and XS certainly is helping to drive people to work harder for these causes. They win, not us, not 2CH...we just get a nice lift from beating EasySpews every few days

Page 46 of 70 FirstFirst ... 364344454647484956 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •