ASUS Maximus Formula SE

[KALISPIMENTA]

I got my q6600 to 3.5 with the crazy option in the bios.Now, how can i see all my bios option so i can tweak them manually? Some bios when set to auto show the current value but not this one.Any solutions?

[binormalkilla]

Well I tried running 333 and 266 FSB strap with my memory clocked at ~1030 or so......it wouldn't POST. I know it's stable at these timings and frequencies because I ran DDR2-1066 when I was running 400*9 on my CPU.
Right now I'm testing for tighter timings.....I ran HCI memtest for ~45 minutes at 4-4-4-10 35 2T using 2.16V (2.22V actual)
I'm going to try 3-3-3-10 and see how that affects bandwidth.....I doubt it will much though. Here is my bandwidth a 4-4-4-10 DDR2-846:

[jorgito05]

The key is on the back of the CD slip that the Driver disc comes in.

I thaught that was the key too, I tried it and dint work; Maby I misstyped it, I looked again and it sais S/N not key. I'll try again.

With Referance to AI Suite: the new updated version from the Asus sight finnaly did work, It installed and ran, but I tell you after starting to play with it, it scared the s**t out of me; I tried to tweek the mem voltage because I had it set in the bios to 1.8 and both bios and Probe II read 1.97, and all of the sudden Probe began to alarm and all my voltages where redicuasly hi like 4.7 on dram. I tell you I quickly turned of the comp, restarted had to clear the bios and reset.

Needles to sa I copleatly removed AI Suite.

[jorgito05]

what version of 3d06 do you have I'll pm you a key

Your efferts to be healfull are much appreciated, I'll have to see what vesion it is, and I'll try typing in the numbers on the back of the CD envelope first.

I'll let you know, Thank you.

[punisher69]

Your efferts to be healfull are much appreciated, I'll have to see what vesion it is, and I'll try typing in the numbers on the back of the CD envelope first.

I'll let you know, Thank you.

I went through that confusion today.

I believe you have to type the numbers all in "CAPS" and include the dashes "-"

[jorgito05]

what version of 3d06 do you have I'll pm you a key

The Key worked, it did recognize it, but the program still does not respond, took it out again. Thanks anyways.

[jorgito05]

I went through that confusion today.

I believe you have to type the numbers all in "CAPS" and include the dashes "-"

This time I did take into consideration that it may be case censitive, and did incorporate the dashes, and it did recognize the key, but still will not respond when I click on it. I am beggining to think that these optional utilities suck and I may be better of without them.

Thanks for your suggestion though, you where right, it did work.

[jorgito05]

What I really wanted to do is monitor my individual core temp. so I found a monitor from the makers of CPU Z.

I hope I can post the link, I am new at this, but just in case I will write it first.

http://www.cpuid.com/hwmonitor.php

Link:http://http://www.cpuid.com/hwmonitor.php

[punisher69]

This time I did take into consideration that it may be case censitive, and did incorporate the dashes, and it did recognize the key, but still will not respond when I click on it. I am beggining to think that these optional utilities suck and I may be better of without them.

Thanks for your suggestion though, you where right, it did work.

Glad to help.

[jorgito05]

Glad to help.

Do you have any pics?

[Grnfinger]

Well I tried running 333 and 266 FSB strap with my memory clocked at ~1030 or so......it wouldn't POST. I know it's stable at these timings and frequencies because I ran DDR2-1066 when I was running 400*9 on my CPU.
Right now I'm testing for tighter timings.....I ran HCI memtest for ~45 minutes at 4-4-4-10 35 2T using 2.16V (2.22V actual)
I'm going to try 3-3-3-10 and see how that affects bandwidth.....I doubt it will much though. Here is my bandwidth a 4-4-4-10 DDR2-846:

Try it on the 333 strap with transaction booster DISABLED Boost Level 0
I find on the 333 strap with it enabled I get the DET RAM hang

[binormalkilla]

Try it on the 333 strap with transaction booster DISABLED Boost Level 0
I find on the 333 strap with it enabled I get the DET RAM hang

You know I haven't even tried disabling the transaction booster...I have it set to 0. What do you have the clock twister set to? I have mine to strong.....tested light and auto though.

[Grnfinger]

You know I haven't even tried disabling the transaction booster...I have it set to 0. What do you have the clock twister set to? I have mine to strong.....tested light and auto though.

I get best bandwidth on Strong so I keep it there as well

[KALISPIMENTA]

Anyone?

[Grnfinger]

bios>power> hardware monitor, scroll down to see volts ect...
or use everest to verify auto settings

[jorgito05]

How do you guy post for example the results from CPU Z or everest Ext.
How do you post what' on your desktop.

[FZ1]

Take a screen shot of them up on the screen. Hit the "Print sceen" button (usually above the insert/home/page up keys) and then open MS paint or other prog and paste.
Or use SnagIt or similar screenshot utility.

[jorgito05]

Take a screen shot of them up on the screen. Hit the "Print sceen" button (usually above the insert/home/page up keys) and then open MS paint or other prog and paste.
Or use SnagIt or similar screenshot utility.

My print screen button does't work, I am using a wireless keyboard and mouse my son in law gave me mabe I have to download drivers it's a Logitech EX110, do you have any ideas where?

Thanks for your quick responce!

[Grnfinger]

ummm
its ctrl+print screen then paste in paint

[jorgito05]

ummm
its ctrl+print screen then paste in paint

sill no-go, Can't find drivers. Logitech EX110. I gues I'll have to take a pic.

Great picture of your Rig, very nice, damm skippy

[binormalkilla]

sill no-go, Can't find drivers. Logitech EX110. I gues I'll have to take a pic.

You just have to press print screen on the keyboard then press control+V while in Paint. I doubt the drivers will affect this....unless the print screen isn't actually working.
This is actually a command that is built into windows......print screen copies the screen to the clipboard, where it's ready to be pasted.

[ReZ_]

he can't get a screenshot and he gets help.

i post my findings with screenshots and ask for comments and get squat.
Am i in the right thread?? oh yeah, i think i am, i've read all the posts here, i think i'm at the right place.

can't get a screeny goin.... ouch... but he's got a rig to control nasa get a mac dude.

anyway, nice case, i have the same, it's nice, but i can't say it's awesome

i'm trying to get 9x425 stable now, 1hr stable, but not 24. Latest find : Transaction boster is a POS, disable it. Enabled at 0 is NOT disabled. From what i've read it only tightens or loosens memory timings, but i can do that manually. If anyone is reading...........

Maybe i'll just shut up and silently leech knowledge and not give anything back to the board.

[Grnfinger]

he can't get a screenshot and he gets help.

i post my findings with screenshots and ask for comments and get squat.
Am i in the right thread?? oh yeah, i think i am, i've read all the posts here, i think i'm at the right place.

can't get a screeny goin.... ouch... but he's got a rig to control nasa get a mac dude.

anyway, nice case, i have the same, it's nice, but i can't say it's awesome

i'm trying to get 9x425 stable now, 1hr stable, but not 24. Latest find : Transaction boster is a POS, disable it. Enabled at 0 is NOT disabled. From what i've read it only tightens or loosens memory timings, but i can do that manually. If anyone is reading...........

Maybe i'll just shut up and silently leech knowledge and not give anything back to the board.

Actually transaction booster helps ram alot, and its common knowledge that Enabled 0 is not disabled mode, hence the term ENABLED

But seroiusly this is a great board with alot of really helpfull ppl, perhaps its your attitude thats preventing anyone from responding.
I try to help if / when I can and if I see a post that I can help with I do.

[jorgito05]

he can't get a screenshot and he gets help.

i post my findings with screenshots and ask for comments and get squat.
Am i in the right thread?? oh yeah, i think i am, i've read all the posts here, i think i'm at the right place.

can't get a screeny goin.... ouch... but he's got a rig to control nasa get a mac dude.

anyway, nice case, i have the same, it's nice, but i can't say it's awesome

i'm trying to get 9x425 stable now, 1hr stable, but not 24. Latest find : Transaction boster is a POS, disable it. Enabled at 0 is NOT disabled. From what i've read it only tightens or loosens memory timings, but i can do that manually. If anyone is reading...........

Maybe i'll just shut up and silently leech knowledge and not give anything back to the board.

Perhaps your right, I'll keep in mind to place those kind of questions in a diffrent thread. I just thought it was relavent, I was trying to post my results.

[Grnfinger]

sill no-go, Can't find drivers. Logitech EX110. I gues I'll have to take a pic.

Great picture of your Rig, very nice, damm skippy

http://drivers.softpedia.com/get/KEY...-110-301.shtml

http://www.logitech.com/index.cfm/433/154&cl=ca,en

drivers for your keyboard