A Positive Look at the Antec Nine Hundred (900) Case

[Pedalmonkey]

i was looking at my case and i was wondering if anyone saw it possible to remove the bottom 3 HDD racks and mount 120.3 rads on their sides in that area. if i cut a hole in the door and the mobo tray and then covered it with mesh i could get the airflow. The only problem i see is how to route the tubing. i could use some 90 degree angled fittings but that would kill my flow.

<EDIT>I was doing some quick measurement to the case and rads, and i need about 250-300mm of clearance to fit 2 rads, 38mm fans and have some room for the rads to breath. the case only has about 200mm width. so here was my idea. take some moders mesh and make enough room with the case. Then cover the top of the rad area with an aluminum sheet to kind of isolate it from the rest of the case use the front 120mm as a vent fan. Possibely even mod the front of the case to have 2 120mm fans to help vent even more. just throwing the ideas out. i need to buy the rads, mesh, etc before i mod, but thats my plan<EDIT>