Lightman: How to get that high NB?
I can do now only NB: 9x235 and cpu 10.5x235.
Can not set NB x10. And any higher Htt will make mainboard reset clock to df.
Many thanks. May be my cpu suck.
Lightman: How to get that high NB?
I can do now only NB: 9x235 and cpu 10.5x235.
Can not set NB x10. And any higher Htt will make mainboard reset clock to df.
Many thanks. May be my cpu suck.
I'm doing this in two steps
1. Set HTT220-228 and NB x10, if it boots to Windows then OK![]()
2. Back to BIOS and set desired HTT speed, should take off![]()
My CPU either likes high NB speeds or simply BIOS is not setting multiplier properly, but on the other hand I can't BOOT if I'm trying too high. The only thing I'm getting then is looong beeeep![]()
Also higher HTT = lower NB speeds possible for stable operational...
Have fun![]()
RiG1: Ryzen 7 1700 @4.0GHz 1.39V, Asus X370 Prime, G.Skill RipJaws 2x8GB 3200MHz CL14 Samsung B-die, TuL Vega 56 Stock, Samsung SS805 100GB SLC SDD (OS Drive) + 512GB Evo 850 SSD (2nd OS Drive) + 3TB Seagate + 1TB Seagate, BeQuiet PowerZone 1000W
RiG2: HTPC AMD A10-7850K APU, 2x8GB Kingstone HyperX 2400C12, AsRock FM2A88M Extreme4+, 128GB SSD + 640GB Samsung 7200, LG Blu-ray Recorder, Thermaltake BACH, Hiper 4M880 880W PSU
SmartPhone Samsung Galaxy S7 EDGE
XBONE paired with 55''Samsung LED 3D TV
Guys, anyone using a 6400+ on this board?
I've just swapped out my POS K9A Plat for this and no matter what bios i try the highest multiplier reported is 15.5x.
Anyone else had this?
bingo13, any chance of asking your contacts what the reason for this is?
Cheers.
Anyone interested in trying the F4A BIOS? New core code from AMD, still a little rough around the edges though....
Does the new microcode automatically enable the TLB-fix or are they independent?
RiG1: Ryzen 7 1700 @4.0GHz 1.39V, Asus X370 Prime, G.Skill RipJaws 2x8GB 3200MHz CL14 Samsung B-die, TuL Vega 56 Stock, Samsung SS805 100GB SLC SDD (OS Drive) + 512GB Evo 850 SSD (2nd OS Drive) + 3TB Seagate + 1TB Seagate, BeQuiet PowerZone 1000W
RiG2: HTPC AMD A10-7850K APU, 2x8GB Kingstone HyperX 2400C12, AsRock FM2A88M Extreme4+, 128GB SSD + 640GB Samsung 7200, LG Blu-ray Recorder, Thermaltake BACH, Hiper 4M880 880W PSU
SmartPhone Samsung Galaxy S7 EDGE
XBONE paired with 55''Samsung LED 3D TV
Does the DQ6 Bios have an option to increase CPU-NB voltage?
I can see that option helpin us get to ~2.3Ghz northbridge speeds
Phenom 9850 | Gigabyte 790FX-DS5 | 2GB RAM | Gecube 3870+3850
Bookmarks