Water Cooled Case Gallery

[mnemonick]

That case is packed capital P

LOL! It has 2 WD Raptor 150 GB in Raid 1 and 2 Hitachi 1TB in Raid 1. A Blue Ray drive, and an asus 20X burner. every space is filled...

[taylormsj]

Few things still to do but its nearly there

Hey tom you should think about getting that into custom pc's reader's drives, you deserver some prizes, and some publicity to your awsome site !! love it

[matt100]

Few things still to do but its nearly there

Nice work dude..

Mine will be better though

[pattherat111]

Hey tom you should think about getting that into custom pc's reader's drives, you deserver some prizes, and some publicity to your awsome site !! love it

amen

[CyberDruid]

I like the red/black theme and all the attention to detail: nice look

[mnemonick]

>Originally Posted by systemviper
>Hi, I am building a rig using he same case, I hope we can chat as i go >through the process, it's always great to have some experience to help.

>Regards
>steve

No problem! Be glad to help. Preparing the case wasn't hard at all.

I removed the 3 HDD holder in the front lower portion of the case to make room for the radiator (Thermochill 120.2). I screwed 4 standoffs into the 4 holes on one side of the thermochill and then using 2 of the pre-drilled drive bay holes (they line up prefect) for the front of the radiator, and drilling the other 2 for the rear standoffs (into the drive bay). FYI i used the fan from the HDD bay i removed (and one from another case) for the FRONT of the radiator for looks, and it does increase the airflow versus just having the panaflos pushing into the back. I also removed the foam dust collector pads that were in the front drive bay covers to increase air flow (and looks).

We tried mounting the pump several different ways, but the best method we found was using 2 layers of 3m automotive trim tape on the pumps back. This stuff never lets go. As you can see i bought some 1/2" elbows for the pumps outlet over to the bottom of the radiator. Another thing i did, which is optional: I use a 700w thermaltake modular power supply which has a fan on the bottom. This fan is blocked by the rear-top HDD bays. I turned the power supply around so the fan faces the back of the case, and then cut a matching hold into the aluminum case side. Just by freak coincidence we have a C02 laser (My dad has extravogent hobbies) so i cut 1/4" Plexiglas with louvers for air intake to fit the hole and make it look nice. I also cut Plexiglas to mount the swiftech reservoir as you can see in the picture. With the laser we can cut anything wood or plastic up to 1/2" thick, it just needs to be a Corel-Draw X3 or autocad drawing. If you like i can cut another swiftech mount and mail it to you for free, it only takes a few seconds to make.

[canadiantire]

update some x'mas edition

[binormalkilla]

More pics





Didn't resize these....
http://aycu04.webshots.com/image/388...7549067_rs.jpg
http://aycu38.webshots.com/image/382...6647295_rs.jpg
http://aycu35.webshots.com/image/370...5561605_rs.jpg

[rafwlkp]

Nice setup binormalkilla. Keep going !

[binormalkilla]

Nice setup binormalkilla. Keep going !

Thanks I just pushed her to 3.8 last night, and I'll go higher when I return from my parent's on Wednesday

[Sinny]

Yes id also like to know about the clearance, just watched your case on youtube its good

Thanks

Im hoping to start a new project in the new year, Fancy having the Black Album snake laser cut into the side of my "new" case.

sorry for low resolution




(Their is 7.1cm of clearance)

I need to give it a go-over with a can'o air ^_^

[CyberDruid]

Like the look of the rig Binormalkilla.

[binormalkilla]

Like the look of the rig Binormalkilla.

Yea he has that Swiftech Radbox. I'm really that the Radbox is sturdy enough to hold that 480GTX......because I would've had to fabricate a bracket for it if not.....there isn't any way it would fit in my case without relocating the SATA cage and the top 5.25" cage.

I wish I could have mounted the top of the rad flush with the case....but as you can see that isn't possible with the location of the 120mm exhaust case fan.
I may look into drilling some holes....
I still have to take my dremel to the top fill port hole and widen it......looks like crap with it poking out like that

[ka lok]

Just like to say merry christmas everyone. Have a good One!

[NEvolution]

Still using plain distilled water.
Going to use my G11 + Biocide mixture once my FuZion nozzles come in and I find the best nozzle to use.

[Digital Nirvana]

[im]http://farm3.static.flickr.com/2047/2132184745_2f35637701_b.jpg[/img]

Still using plain distilled water.
Going to use my G11 + Biocide mixture once my FuZion nozzles come in and I find the best nozzle to use.

use the 4.5mm

[NEvolution]

And if it's a Q6600? Use the quad nozzle right?

[Zgradis]

Can some one tell me where SiNiSon got his sATA cables from? I mean I found the one website someone posted but I live in the US and it doesn't have prices for the US and I can't ship to the US.

[k0la]

Can some one tell me where SiNiSon got his sATA cables from? I mean I found the one website someone posted but I live in the US and it doesn't have prices for the US and I can't ship to the US.

he sleeved them himself

could you post the link to the website btw?

[Zgradis]

he sleeved them himself

could you post the link to the website btw?

Here ya go it was on this thread if you just searched through it...

It is ac ryan black acrylic. The sata cables are these one: http://www.revoltec.de/english/produkte/rc049.htm 1st on that list.

[Zgradis]

P.S. Everyone Murderbox.com is up... check it out! I guess he is selling his mod to anyone who wants to buy it! I can't get the pictures to come up... but still impressive none the less

[sstrokerace]

That's it, no pics of the inside unless you want some. Just a simple unit that I'm running in my sig.

[Vatos_locos]

new toy all in the same loop
Orthos + Atitool stressing stable
Cpu E4300 @ 3600 ( 400 x 9 1,6 Volt )
Vga 7900gs @ 700/800 Vmoded ( Vdimm 2,35 Volt/ Vcore 1.55V )
Cpu temp 40 *C
Gpu temp 42 *C
Board temp 27 *C
with Orthos ( blend ) and ati tool ( scan for artifacts ) running until all the component reach the max temps

[Pudi]

murderbox.com is up, OMG my eyes

[dnb#]

murderbox.com is up, OMG my eyes

Yeah, I saw the site was up and I thought to give a call up here but you were first