ASUS Maximus Formula SE

[Typhoon2000]

Hello all.Although I m new i have read almost all the posts in here.But i still have a prob.I dont have a mind blowing O/C on my Q6600 but im trying to learn through reading and testing.
My question to you is the following.I have managed to run @ 8x425 with 1.4v in bios (903) 1.38 in Win Cpu-z.This is Prime95 1+hour stable.Going to 8x426 at the same Volt and i get an error within 10 mins.So i guess this is the absolute Max for this Voltage.The problem is that i cant run Prime95 Blend test stable at all.i get an error within 5-7 min.I run my Crucial at 1020@5-5-5-15 through priming.I also have:

FSB Strap @ 333
Cpu PLL @ 1.54
NB Volt @ 1.49
DRAM Volt @ 2.06
FSB Term Volt @ 1.3
SB Volt @ 1.05
Loadline @ Enabled
CPU GTL @ 0.63x
NB GTL @ 0.67x

Do u think there is a way to run it stable for Prime 95 blend test?
Is 1.38 real Voltage 100% safe for 24/7?If yes, whats the max i can go for 24/7?

Thank u all in advance...dont be harsh on me

Yes try more FSBT votage, Then try raising NB volts a bit. I'd run the small FFT's in prime to test stability of your CPU before moving onto blend, which stresses your RAM more.