I dont know if i should RMA my own Neo2-FR ....

CPU: Q6600

1. It has never shown CPU Fan rpms being more than 1100 (AFAIK shoudl be 2000-2700) ... I get 77C under orthos load at stock 2.4 and 84 @ 3Ghz .... Either is misreading both CPU fan rpms and temperatures or is not controlling the CPUfan at all and indeed temps raise that high ... smartfan is not working anyways no matter what settings

2. Lost two times the 16x link width of the PCIE16x to 1x and then revived again, have no clue how and why

3. all bioses above v1.3 will give me as starting VCORE setting the 1.30v (instead of the proper 1.25v). 1.3v will be the lowest option in the vcore menu settings .... (and the measured voltage with this setting is 1.272)

4. bios 1.76 wont save the settings at all always post up with "bad checksum error Press F1 to enter setup or F2 to load default values and continue" message. No matter what i do (I think this happened with 1.6 too). Ofcourse did complete CMOS clearing, no power etc