froste, what fsb have you reached with the q6600 on this board?
froste, what fsb have you reached with the q6600 on this board?
Xigmatek elysium
i7 920, 4.2 at 1.32v 60C after 24 hours prime 95
asus p6t6 ws revolution
4870 1gb
6gigs ddr3 1600
x25-160 g2, velociraptor 300gig, 4x 2tb hitachi 7200rpm on an lsi 9260-81
lg bd/hdvd combo
apogee xt rev 2.0, swiftech 360, 240 with 4 sanyo denki's
and 1 scythe (25mm did not have space for another 38mm)
2 d5's in a koolance 425x2 res
Test setup:
EVGA 780i
Intel Q9550 (YorkField) ES w/ stock P4 Intel cooler
2x1GB CL4 800MHz
2x EVGA 8800GTS 512 (G92) w/ stock cooler 100% fan
PC P&C 1KW
XP 64
FSB: 464
Multi: 8.5
Last edited by froste; 12-20-2007 at 02:58 PM. Reason: update
"I only want to be known as the best ever......is that too much to ask?" - B.J. Penn
Sweet, that what i'm thinking about! Very nice job
HWbot - Team: XtremeSystems
XS cruncher - Team: XtremeSystems
OCN Feedback
HEAT
*** Being kind is sometimes better then being right.
Ill go for max tonight or tommorow, I have done 450~ no problems.Originally Posted by jkresh
"I only want to be known as the best ever......is that too much to ask?" - B.J. Penn
good news, i can run my g.skill at 550mhz 5-4-4-12 (2.2v) max on the x38 was 533-540 at 5-5-5-15........ram latency seems to be kind of high, higher than the x38 thats for sure, but bandwidth seems the same.
Update:
More here: http://www.xtremesystems.org/forums/...d.php?t=170292
Last edited by froste; 12-20-2007 at 11:06 PM.
"I only want to be known as the best ever......is that too much to ask?" - B.J. Penn
guru3d has some tests with QX9650 and 680i there lol
AWESOME
Anyone running one of these boards upside down? I might get one to play with over the holidays, but it would have to go in my Lian-Li inverted.
Shawn
Asus P6T6 Revolution/Core i7 965EE
Vista Ultimate 64bit
BFG GTX295
6x2gig OCZ Platinum DDR3-1600
Samsung SH-S223Q
2 640gig WD's in raid 0
Areca ARC-1210
Auzentech X-FI Forte/Z-5500's
Corsair 1000w psu
I have Asus P5N-T Deluxe, nForce 780i SLI board ... but i cannot to overclock my Yorkfield ... if i will set any higher FSB then 1333MHz ... no post, board freezes ...
I think i have a buggy first release of mobo ... damn
i don't see where that would make any difference.
e6850 @ 3.6Ghz
TT TRUE lapped
evga 680i
Lian Li PC-60B plus II
2x eVGA 7950GT KO's
2GB Ballistix DDR2-1066
PCP&C 750w Silencer
SB Audigy2 ZS
20" SyncMaster 204B
2x WD 160gig sataII's RAID-0
My Heatware 25-0-0
I just found this board over at NCIX for 80.00 cheaper than newegg has it. It's a good deal and I just couldn't pass it up, as I plan on putting it to the test over the holidays.
Thanks for the reply, scarface.
Asus P6T6 Revolution/Core i7 965EE
Vista Ultimate 64bit
BFG GTX295
6x2gig OCZ Platinum DDR3-1600
Samsung SH-S223Q
2 640gig WD's in raid 0
Areca ARC-1210
Auzentech X-FI Forte/Z-5500's
Corsair 1000w psu
GAR, can you give me some measurements from the new 780i? I have a Maximus Formula (X38) and the RAM slots are in oriented ideally for my case (long story) can you indicate how much farther up the board they are oriented on the 780i?
Update:
I installed XP 32 bit and brought out my good G.Skill kit I have. Got up to 469 FSB bench stable with memory at 1154 MHz @ 4-4-4-5. Fedex should be here with my 9650 soon, will post results later.
Scored a little higher.
"I only want to be known as the best ever......is that too much to ask?" - B.J. Penn
hey bro, i can get you acurate measurements in a bit when i get to my computer.................otherwise i have been trying to get my ram to pass occt, i cant get it to pass for the life of me.............still working on it.....
How about 11 x 425?
so the FSB issue i was having is only between a certain fsb, from 1650-1775
For benching yeah, but for 24/7 I'll settle with 3.8-4ghz ( if possible ), Victor Wang already fried one of his puppies , I don't want to be nr 2How about 11 x 425?
Question : Why do some overclockers switch into d*ckmode when money is involved
Remark : They call me Pro AsusSaaya yupp, I agree
I will just be happy with 3.6-3.8 with my E6750......
not stable tho.
Last edited by GAR; 12-21-2007 at 01:20 PM.
Now I just have to figure out how to get it there. The memory dividers on this generation of CPUs/mobos confuse the sheeeeeeeeehite out of me.
My last rig was an Athlon64 3200+ @ 2.8Ghz. That was an easy o/c, these numbers, not so much.
EDIT: Im thinking I should keep it @ 1:1 and just tighten the timings down @ 450/475....??????
yup good idea
The fsb 480-475mhz is about as high as these boards can OC w top end stability so far.
Tech Report review OC'd fsb 480mhz rather easily but they couldn't tweak the fsb to go higher.
Legitreviews OC fsb 475mhz
So far in this thread 480-470mhz fsb range is top end. I was hoping for solid average FSB 500 from 780i boards. Did not 680i's fsb hit 500mhz and over range?
I'm in process of shopping for a new Intel 45nm build. I'm leaning towards Asus P5k Deluxe P35 Wi/fiAP DDR2, from all the reviews I've read they seem to overclock very well and stable up to fsb 500mhz.
On the down side, I won't get SLIonly crossfire which I'm not a favorite of.
Big difference if you're talking dual or quad. So far these early reports suggest the 780i clocks quad fsb as well as P35/X38, which was not the case with 680i.
2600K | Maximus IV Formula | 12G Corsair 1600 C8 | 2x 6950 | Coolermaster Scout
I do believe I saw somewhere (Chinese review) where they did comment 780i lackluster dual core OCing compared to X38/P35, but OC'd equally w quads in comparison to X38/P35 chipset.
It be interesting if someone had dual core e6750 or e6850 pop in and see how high they OC fsb on these boards.
Posting Permissions
Reply With Quote
Bookmarks