Quote Originally Posted by zsamz_ View Post
set gtl settings 68% to 70% of voltage settings
on auto it will be set @ 67% its too low
cpu vtt must be set slightly higher than cpu v
improper gtl setting will give you many problems
gimme your voltage settings i'll give you gtl settings
btw i'm also new to dfi lol
Hello zsamz, maybe the problem can be found in the gtl settings. I leave it on "disabled".
I was trying two type of config: one with the vcore at 1.42 that I use for 425*8, and another with the vcore at 1.47 for the 450*8.

At this point I don't know how to set the memory strap because everytime i move it the mobo doesn't start on the next boot... even if i try a 267*9 with 200\800 (as example).

By the way, can you give me some trick about the NB e SB voltages? What is the maximum vcore that I can give to them? Are they involved with my faulty boot?

Thank you for your help!

Quote Originally Posted by Praz View Post
On auto the strap/divider is changing when FSB is scaled.
Mmmh, so what can I do? Maybe I can try first with the settings reported zsamz?

Bye e thank you!