Official GIGABYTE X38-DQ6/X38T-DQ6 Info/BIOS Thread

[freqy]

hi

just installed my ninja plus revision B on x38-dq6.

ive up'd to:

3.2ghz (q6600)
1066mhz dom pc800 ram at
400fsb (2.66d)

its running around 52 deg c ( via core temp .95.4)

before on stock at 2.8ghz (which is lower) i was at around 60 degrees on load
running prime.So pretty great because also i have my case fan turned down at the moment.

Not all the cores were the same temp on stock cooling , core 3 was averaging '5' degrees cooler always. i thought perhaps the cooler needed laping?
now core 1 is averaging 3 degrees lower so a bit better.

i may re- lap the cooler or even lap the cpu at some time ..But, as they aint broke im not gonna try and fix at the moment,

thanks to shanks for the advice !!

peace

freqz

[zsamz_]

gar look what dfi can do with 4 sticks
i know not verry good but its only first bios
can do 1200+ but need 2.3v

[ChrissTi]

On Air cooling
I think I'll drop a little the frequencyes ... Too hot I think I reached the maximum of that CPU on air... The voltage I set in bios is 1.65