Quote Originally Posted by ninogui View Post
here´s two pics... i used in fact one extender bolt for the nb and ram fans, both in the same. if your config is vertical top down u can just use cable ties. if its BTX mount like mine, even better, gravity will help too lolol



close up



greets
Cool, same TJ-06 I use for one of mine. Only thing to note is that the NB wll get upto 5C hotter and bout +3 on SB in that possition. I had to remove the NB/SB pipes and use aftermakeet on one and turn on side (like HTPC style) for the other to get good temps with stock coolers on mobo. I also added a clear plastic devider to keep the origional tunneled design since we cant fit the stock SilverStone model anymore. I just trimmed and fitted it from the front fan along the top edge of the VGA (using the majority of the card as the damm) to guide air toward the rear fan. The damm came completely to top of window and folowed length of cast toward back and proved to be functional, especially on model with ThermalRight NB/SB coolers and in upright BTX configuration.

Nice case.