Hello!

Just got my new Striker Extreme today, along with some new memory and some new 8800 GT's, and once Vista is done updating, I plan on overclocking this stuff

So am thinking of using the settings below for my:
Striker Extreme
E6600 (On a Waterkeg)
2 x 8800 GT eVGA OC (On WaterKeg)
2 X 2GB G.Skill PC-8000 5-5-5-15 (Vista was grumpy about having both of these installed when it was installing... guess I have to apply some Vista patch)
2 150GB Raptors RAID 0
Soundblaster X-Fi
Vista 64-Bit (Installing as we speak :p)

Of course some of the settings below need some tweaking for my actual system, but I think it should be a good starting point, do you agree?






Quote Originally Posted by linflas View Post
Try these for 3.6 on 1303

AI Tuning: Manual
Nvidia GPU Ex: Disabled
LinkBoost: Disabled
CPU Multi 8
FSB - Memory Clock Mode: Unlinked
x FSB - Memory Raio: N/A
FSB (QDR), Mhz: 1800
Actual FSB (QDR), Mhz: 1800
MEM (DDR), Mhz: 900
Actual MEM (DDR), Mhz: 900
Vcore Voltage:1.525 for actual of 1.42
Memory Voltage:2.05
1.2v HT Voltage:1.7
NB Core Voltage:1.5
SB Core Voltage:1.65
CPU VTT Voltage:1.4
DDRII Controller Ref Voltage: auto
DDRII Channel A Ref Voltage: auto
DDRII Channel B Ref Voltage: auto

tCL (CAS Latency): 4
tRCD: 4
tRP: 4
tRAS:12
Command Per Clock (CMD): 2


Advance Memory Settings
tRRD: AUTO
tRC: AUTO
tWR: AUTO
tWTR: AUTO
tREF: AUTO
tRD: AUTO
tRFC: AUTO
Async Latency: AUTO

CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
MCP PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
LDT Spread Spectrum: Disabled

CPU Internal Thermal Control: Disabled
Limit CPUID MaxVal: Disabled
Enhanced C1 (C1E): Disabled
Execute Disable Bit: Disabled
Virtualization Technology: Disabled
Enhanced Intel Speedstep Tech: Disabled
LDT Frequency: 5x

PCIEX16_1 Frequency (Mhz): 100
PCIEX16_2 Frequency (Mhz): 100
PCIEX16_3 Frequency (Mhz): 100
SPP<->MCP Ref Clock, Mhz: 200



I wish I had a better understanding of these actual settings so I wouldn't always have to ask Guess I am a bad studier (that really isn't a word...)