Quote Originally Posted by C-N View Post
Hi Saint-Francis

What CPU are you hoping to use around 400 - 420fsb.

The transpiper mounted so the heatsink is in the flow from the PSU is a waste of time for me as my 1010w OCZ kicks out hot air under load.

I can pull 400 - 450 fsb easily on the stock UT's heatpipe with silent running fans over both the PWM & NB.

Without the Transpiper I get mid to high 40's priming with my Quad @ 475 x 8 & mid to high 30's priming with my Dual core @ 500 x 8 with a 20oC ambient & good air moving over the NB.

CN
I'm using a Q6600. I have an open air system so I wouldn't be mounting the transpiper on the PSU fan. I would jut have it sticking up in the air with a fan attached to it. I have some almost silent 80 mm fans that I could use but it seems that it might be a hassle to mount one to the transpiper. What do you mean by "good air moving over the NB"? Can you please describe your set up a little more for me?
This is what I'm trying to decide:
Get the LT (save 40$) and just take the heatsink off and use my Swiftech MCW-30,
Or
Get the UT (spend 40% more) and try to make the transpiper work adequately.