Main system:
Q6600 G0 L737B 3,8GHz
Maximus Formula X38
Ballistix PC2-8500 2x1GB
XFX 8800GT XT
Corsair HX620
X-Fi Platinum
150GB Raptor (Dual Boot) /2x 250GB WD Caviar (Apps)
Lian-Li V2000B Plus II
School: MacBook
Studying in: Pharmacy
Where: University of Montreal
wat sort of fittings are they on the cpu block are they those compression fittings or whateva there called
I have 3 girlfriends, my job, my car, and my computer. My job is the rich girl, just spend some time with her and she will provide a supply of cash. My car is the material girl, a lot of money from the rich girl goes on her. Have to be careful to keep her happy. My computer is the faithful girlfriend, I dont need to spend much on her but she is still good to me.
![]()
![]()
![]()
Can anyone let me know if over tightening EK 1/2in barbs will cause a leak ?
I think it could if the O-ring was damaged? Not sure.
Asus Maximus SE X38 / Lapped Q6600 G0 @ 3.8GHz (L726B397 stock VID=1.224) / 7 Ultimate x64 /EVGA GTX 295 C=650 S=1512 M=1188 (Graphics)/ EVGA GTX 280 C=756 S=1512 M=1296 (PhysX)/ G.SKILL 8GB (4 x 2GB) SDRAM DDR2 1000 (PC2 8000) / Gateway FPD2485W (1920 x 1200 res) / Toughpower 1,000-Watt modular PSU / SilverStone TJ-09 BW / (2) 150 GB Raptor's RAID-0 / (1) Western Digital Caviar 750 GB / LG GGC-H20L (CD, DVD, HD-DVD, and BlueRay Drive) / WaterKegIII Xtreme / D-TEK FuZion CPU, EVGA Hydro Copper 16 GPU, and EK NB S-MAX Acetal Waterblocks / Enzotech Forged Copper CNB-S1L (South Bridge heat sink)
Talonman did you get it today?
Silverstone FT02
Asus Maximus III Formula, Intel i7-875k, Corsair 4x2gb Dominator 1866mhz
SLI EVGA GTX 580s, PCI-E X-Fi Audio
2x WD Raptor 600gb sataIII Raid 0, 2x1tv WD SATA Black Raid1
Thermaltake W0133RU 1200W
Windows 7 Ultimate x64, Dell 2310 3d lcd
Nope, and Sunday is a no go for sure...
I take it you had no luck either?
Asus Maximus SE X38 / Lapped Q6600 G0 @ 3.8GHz (L726B397 stock VID=1.224) / 7 Ultimate x64 /EVGA GTX 295 C=650 S=1512 M=1188 (Graphics)/ EVGA GTX 280 C=756 S=1512 M=1296 (PhysX)/ G.SKILL 8GB (4 x 2GB) SDRAM DDR2 1000 (PC2 8000) / Gateway FPD2485W (1920 x 1200 res) / Toughpower 1,000-Watt modular PSU / SilverStone TJ-09 BW / (2) 150 GB Raptor's RAID-0 / (1) Western Digital Caviar 750 GB / LG GGC-H20L (CD, DVD, HD-DVD, and BlueRay Drive) / WaterKegIII Xtreme / D-TEK FuZion CPU, EVGA Hydro Copper 16 GPU, and EK NB S-MAX Acetal Waterblocks / Enzotech Forged Copper CNB-S1L (South Bridge heat sink)
Silverstone FT02
Asus Maximus III Formula, Intel i7-875k, Corsair 4x2gb Dominator 1866mhz
SLI EVGA GTX 580s, PCI-E X-Fi Audio
2x WD Raptor 600gb sataIII Raid 0, 2x1tv WD SATA Black Raid1
Thermaltake W0133RU 1200W
Windows 7 Ultimate x64, Dell 2310 3d lcd
We can only hope...
Asus Maximus SE X38 / Lapped Q6600 G0 @ 3.8GHz (L726B397 stock VID=1.224) / 7 Ultimate x64 /EVGA GTX 295 C=650 S=1512 M=1188 (Graphics)/ EVGA GTX 280 C=756 S=1512 M=1296 (PhysX)/ G.SKILL 8GB (4 x 2GB) SDRAM DDR2 1000 (PC2 8000) / Gateway FPD2485W (1920 x 1200 res) / Toughpower 1,000-Watt modular PSU / SilverStone TJ-09 BW / (2) 150 GB Raptor's RAID-0 / (1) Western Digital Caviar 750 GB / LG GGC-H20L (CD, DVD, HD-DVD, and BlueRay Drive) / WaterKegIII Xtreme / D-TEK FuZion CPU, EVGA Hydro Copper 16 GPU, and EK NB S-MAX Acetal Waterblocks / Enzotech Forged Copper CNB-S1L (South Bridge heat sink)
Damn - there's not much room between that Corsair ram cooler and the graphics card. Did you put anything between them to prevent shorting?
I'm going to have the same problem unless I use the lower slot - still trying to decide.
Bookmarks