Lightman: I never run it above 2V usually unless I'm going to drop to CR1 tRFC 75ns, which is what I use for benching as long as I can. The sticks do around 636MHz PL5 4-4-4-4 on 2.2V, and yes I cool them alright.
The 8500 die quick with higher than rated voltage according to my experience but the 5300/6400 last longer with higher voltage, they seem to love it. Though it should logically be the opposite way round.
Originally Posted by KTE
Lightman: I never run it above 2V usually unless I'm going to drop to CR1 tRFC 75ns, which is what I use for benching as long as I can. The sticks do around 636MHz PL5 4-4-4-4 on 2.2V, and yes I cool them alright.
The 8500 die quick with higher than rated voltage according to my experience but the 5300/6400 last longer with higher voltage, they seem to love it. Though it should logically be the opposite way round.I've got Team 1066 and they recommend running at up to 2.4v.
What's the go here guys....should I not give them more than 2.2v?
They're D9GMH
I would not, working with AMD right now. The good news is that I have a retail 9600 that has not failed at 2.38 VMem after 46 hours of full load.
What's the go here guys....should I not give them more than 2.2v?
They're D9GMH
I will have F3D (no TLB patch) posted up later today after stress testing, provided it works better than F3B.
Wow, many thanks. I am waitting for F3D. Please post it asap.
How come DQ6 is the only 790FX motherboard of Gigabyte getting new BIOS?
I feel left out in the cold with my DS5 BIOS rev. F2
System Specs:
System 1: Asus P5E,Q6600 @ 3.6Ghz, 4GB OCZ Plat DDR2-1066, Tri-Raid 0 1TB 16MB cache, Radeon HD4870.
System 2: (wip) Asus M3A78T, Phenom II 720 BE @ 3.8Ghz, 2GB OCZ plat 1066 DDR2, Radeon 2900XT 1GB.
DS5 is at F3a, soon to be updated to F3B.How come DQ6 is the only 790FX motherboard of Gigabyte getting new BIOS?
I feel left out in the cold with my DS5 BIOS rev. F2
I havent seen it on their bios update page. Does it have to be a "B" beta before it is on there?
If so.... link please
System Specs:
System 1: Asus P5E,Q6600 @ 3.6Ghz, 4GB OCZ Plat DDR2-1066, Tri-Raid 0 1TB 16MB cache, Radeon HD4870.
System 2: (wip) Asus M3A78T, Phenom II 720 BE @ 3.8Ghz, 2GB OCZ plat 1066 DDR2, Radeon 2900XT 1GB.
Hello man, any update about F3D?
So I'm more likely to kill the cpu than the ram?
Posting Permissions
Reply With Quote
Bookmarks