QX9650 RETAIL first look...

[eva2000]

wow L740A chip.. what it do on air/water ? max fsb ?

Victor 4.4ghz prime awesome stuff!

[VictorWang]

max I tried = 4.55G prime 1.5v for 3min.
coretemp>80c

[Ace-a-Rue]

Victor, (tongue in cheek) 1.5 vcore doesn't sound extreme

[eva2000]

max I tried = 4.55G prime 1.5v for 3min.
coretemp>80c

how far off are the other 3 cpus compared this gem one you have ???

[VictorWang]

for extreme (4.8G+) , seems no difference with my watercooling.
only a little bit different in vcore (+/- 0.02v)

but quad-prime a lot different , 1.46~1.57v lol
and fsb differs also, this gem max at 460fsb
but the worst prime one can > 475fsb

[eva2000]

for extreme (4.8G+) , seems no difference with my watercooling.
only a little bit different in vcore (+/- 0.02v)

but quad-prime a lot different , 1.46~1.57v lol
and fsb differs also, this gem max at 460fsb
but the worst prime one can > 475fsb

Interesting i'm seeing the same trend from other folks.. good air/water gems all have lower max FSB..

how much more fsb does phase/DI/LN2 give a yorkie ??

[GoldenEye]

1 Word= Kick Ass

[Ace-a-Rue]

HIPRO: not to bad for me with my QX9650...i was able to top out at 4500 mhz on air....settled on 4400 mhz as my everyday working frequency.

[dinos22]

4.4GHz 24/7 quad

gawd damn

[moonsond]

That's a nice gift and nice clocks Congrats, Hipro.

Anyone tested that new redesigned heatsink? Oh this must be a stupid question, i doubt anyone who has got this cpu ATM is interested in running it under boxed cooling

[Ace-a-Rue]

1 Word= Kick Ass

that's two words..

[Ace-a-Rue]

4.4GHz 24/7 quad

gawd damn

life is good in south florida!

[weescott]

wow L740A chip.. what it do on air/water ? max fsb ?

This baby went straight under phase! No farting around with pansy air or water for me!

I really hope I have missed something but, max FSB so far has been 430mhz

[hipro5]

This baby went straight under phase! No farting around with pansy air or water for me!

I really hope I have missed something but, max FSB so far has been 430mhz

Try to "relax" your Rams a bit to see IF it is happening from there....

[hixie]

Hipro5, who gave you that CPU? That CPU came from Hong Kong.

[oanvoanc]

why do you think its from hong kong?

[Dynasty]

Thanks guys.....

@ swedkg: I don't do such things.... (I was lucky for the stepping )
Propably will be good for about 4500MHz on air in a case for 24/7 and lower VCore....

Don't worry mrlobber, I can bench the ES at 5870MHz for Super-Pi 1M....
ALSO LN2 for this one I will test tomorrow (and I hope it does well)...



This number on the PCB of the CPU is indicating (from my obsevations all these years that I'm "focusing" on it) the "place of the wafer" it was cuted....Propably the LOWEST (closed to 00) the TWO LAST numbers are, the "centered of the wafer" it was cuted...
For example: LAST TWO numbers.....000, 100, 200, 300, 400, 500, 600, 700 and so on....
FIRST 15 numbers are the best....for example2: 012, 005, 009, 104, 113, 202, 215, 205, 314, 304, 406, 412, 601, 609, 712, 703, etc....
These 2 LAST numbers should be closest to "00" LIKE: 001, 713, 404, NOT 478, 656 and so on....

At least that's what I have observed by searching all these years....

interesting stuff this is, an code with 4A1220
does 5800mhz(446 x 13)_ln2 @ -136 C, I guess your secret
coding method is correct ........

[hixie]

why do you think its from hong kong?

That CPU came directly out of Synnex, i have close relations with a lot of distributors and factories. That label on the CPU's box with the hand signal "okay" is more than familiar to me. Just looking around me right now i can see 9 of them.

[AndreYang]

That CPU came directly out of Synnex, i have close relations with a lot of distributors and factories. That label on the CPU's box with the hand signal "okay" is more than familiar to me. Just looking around me right now i can see 9 of them.

It's Taiwan's Synnex, not HK.

[hixie]

It's Taiwan's Synnex, not HK.

Ah! that would explain a lot. Was about ready to call up Synnex HK and say where are my CPUs?


EDIT: NVM, i've got mine now!

[PonDTranG]

of the power , already stay with the power , it , the power becomes conceited TRUE ,

[joe.denice]

hmm so far I have 4ghz with 1.3625 volts, should I try 4.4ghz with around 1.45 volts???

[Monstru]

Awesome clocks hipro, and I also see that everybody's getting nice monster retail Yorks....No more quad-core guys.....These are the god-cores, made to rule them all

[hipro5]

Yes, these RETAILS day by day are getting better......

[T_M]

I just took delivery of a loaner L741 for a show im doing here this weekend.
LN2 results early next week.

Wafer number is "horrible" though.