Team Group DDRIII 1600MHz OC Report (56k warning)

[PcCI2iminal]

some high speed and prime

Conroe E66ES CAS7 7-6-15 2T 2.28v


CAS7 6-6-15 1T 2.25v-2.3v



suicide screen at 1040mhz
http://valid.x86-secret.com/show_oc.php?id=275830

Yorkfield CAS6 strap 266

900mhz is very stable for 3d action and I used no more than 2.34v for vdimm.






910mhz CAS6 6-5-18 1T,it seems to be the limit at 2.34v or the mobo(its strap 266)






suicide screen at 938MHz CAS6
http://valid.x86-secret.com/show_oc.php?id=277220


Saaya,AndreY,EnJoY,Fr3ak,eva2000,hipro5,Pedro Rocha
thx for all support and tips ^^

MB-> Asus P5E3 WS Pro no mods (0124 ,0204)
RAM-> Team Group DDRIII 1600MHz CAS7
RAM Cooling-> Thermalright HR-07 Type L
Fan-> Cooler Master A8025-25RB-3BN-PI 2500rpm 32CFM
CPU-> Conroe E6600 ES & Yorkfield QX9650
VGA1-> Leadtek 8800GT 750/1850/1000 + DuOrb
CGA2-> Asus 8800GTX 700/1750/1000 + HR-03 Plus
CPU Cooling-> Thermalright IFX-14
FAN-> S-Flex SFF21F 1600rpm 63CFM & San Ace F12-N/38 2600rpm 102CFM
HDD-> Hitachi 40gb 7200
PSU-> Giga-EZ 1000

[SeLecT]

Very nice!

I hope with a new CPU i can reach the 1000Mhz with my Cellshocks too, but poorly my E6850 will not run with 485Mhz+

[wedfighter]

nice clock and nice stick there bro :thumb:
how many pcb layers ??
just curious

[PcCI2iminal]

Very nice!

I hope with a new CPU i can reach the 1000Mhz with my Cellshocks too, but poorly my E6850 will not run with 485Mhz+

ouch!
it is lower than mine -> 500FSB on air and 533FSB on ice....

wedfighter

6 layers ultra low noises shielded PCB

[SeLecT]

ouch!
it is lower than mine -> 500FSB on air and 533FSB on ice....

Mine is with water...

But my Boards aren't the best, but i don't think, that i can reach a higher FSB with another board. My greatest problems are the dividers.
With my P35T-DQ6 DDR3-1800 isn't stable and my Asus Blitz Extreme has some confusing problems with the DDR3 Retail. It only run with Micron Z9.

Saaya will test it....


i hope i will get i next time a new CPU, then i will reach the 1000Mhz

[Gautam]

Wow. Retail sticks?

[EnJoY]

Truly nice results Junior! Awesome job!

[filmbot]

I have some sitting here just waiting on my Blitz to get here, hopefully will be able to share some results.

Hope mine are something like this

[quake6]

What is max safe ddr3 24/7 voltage?

[CapFTP]

nice review and mostly nice sticks too. I review twice this TG-1600 but they were about 950 pi 1m and no more....good !

[saaya]

select, did you try other straps and pll voltage of 1.9v?

I used no more than 2.34v for vdimm.

oh, "only" 2.35v?

[CapFTP]

select, did you try other straps and pll voltage of 1.9v?

oh, "only" 2.35v?

i usually look only for the upper limit of the voltage range....

[saaya]

lol dont try that when you play with ddr3 and an rog board, they have ddr3 vdimm above 3v

[PcCI2iminal]

Wow. Retail sticks?

yep ,hehehe and its not hand picked

Truly nice results Junior! Awesome job!

Thx Alex
Asus FTW

What is max safe ddr3 24/7 voltage?

1.9v with a good cooling ,a bit more maybe,these sticks works at 1.75v-1.85 so a bit more won't kill them ...i think ^^

select, did you try other straps and pll voltage of 1.9v?

Yorkfield @ 455FSB strap266 i used PLL @ 1.9v ,less than that -> no go but with Conroe i need only 1.7v for 1000mhz

oh, "only" 2.35v?

its a bit more than you said to me ^^

Saaya here is the max pi32m stable at CAS6 at 2.32v



the real FSB for 32m is 438 and the mem clock is 876MHz and for cinebench is FSB @ 440 and 880MHz for RAM

[saaya]

880... thats still good though
i think 2ghz 765 is faster though, right?

[Oliver]

oh, "only" 2.35v?

LOL .

Good work and sticks.

Keep pushing it .

[PcCI2iminal]

thx Oliver ^^

880... thats still good though
i think 2ghz 765 is faster though, right?

i will re-test it for you but i need to use Conroe again cz QX9650 won't run at 500FSB

Conroe at 876FSB CAS6 vs Conroe at 1000mhz CAS7 6-5

[darkone414]

Wow those sticks are nuts. Nice results!