Lets talk breaking the HTT 230 limit on k10 here

[macci]

Tony, 1500 HT is VERY easy with these boards! =)

I ran full weekend loop of 3DMark06 at 8x400 (x5 HT Link) with 5000+ - thats 2GHz HT =)

I think some guys had it up to 2.5GHz HT Link with 6400+ CPU (over 500HT ref. clock!)

[muzz]

I know this is probably a stupid question, but I went googling to no effect...

I see on the Everest shots, that the chipset on the DFI says "AMD Hammer", where as the GB says "K10"

Does that name change when ya put in a K10, or is the DFI a different chipset.

[Tony]

Tony, 1500 HT is VERY easy with these boards! =)

I ran full weekend loop of 3DMark06 at 8x400 (x5 HT Link) with 5000+ - thats 2GHz HT =)

I think some guys had it up to 2.5GHz HT Link with 6400+ CPU (over 500HT ref. clock!)

Looks like my 10 minute play needs to be extended

[Lightman]

Tony, 1500 HT is VERY easy with these boards! =)

I ran full weekend loop of 3DMark06 at 8x400 (x5 HT Link) with 5000+ - thats 2GHz HT =)

I think some guys had it up to 2.5GHz HT Link with 6400+ CPU (over 500HT ref. clock!)

Just to back up your claims



Sources:

http://www.xtremesystems.org/forums/...&postcount=136
http://www.xtremesystems.org/forums/...&postcount=141

PS. 2152HTT was completely stable for normal usage. I didn't run Prime for hours, but I browsed internet and played HL2:EP2 at that setting for at least 3 hours ! Good old X2 6000+