we've found THE GOLDEN ONEs : AMD Athlon64 World Record Thread!!

[gianni-gt]

that 3700+ could be dangerous to mine, if this chip work so good with deep temps... no validation over 3.8ghz?

[knopflerbruce]

that 3700+ could be dangerous to mine, if this chip work so good with deep temps... no validation over 3.8ghz?

I have a valid @ 3812mhz

[gianni-gt]

hehe ok

next weekend will my 4000+ meat dice... hallo 4ghz

[stunned_guy]

That is unbelievable, bruce. Congratz
You are a dual core junkie...

I have tested the new DFI Venus board and here is a first result of maximum HTT with an china cracker 3400+ Venice E6 0613 AAC
http://valid.x86-secret.com/show_oc.php?id=276587

That Venus board is great.....

[Turrican]

That is unbelievable, bruce. Congratz
You are a dual core junkie...

I have tested the new DFI Venus board and here is a first result of maximum HTT with an china cracker 3400+ Venice E6 0613 AAC
http://valid.x86-secret.com/show_oc.php?id=276587

That Venus board is great.....

wow.
is there much difference between the venus and the ultra-d?
performance concerning & htt concerning?

[knopflerbruce]

Tried my 3800+ venice, quite nice chip. http://valid.x86-secret.com/show_oc.php?id=276624

And the 3500+ venice WR. http://valid.x86-secret.com/show_oc.php?id=276627 3669.91mhz

Unfortunately, the poor thing died @ 1.94v

[stunned_guy]

Congratz May he rest in peace...

@ Turrican
Much more otions for voltage:
2.0 v @ chip for example or 4.1 v @ dimms
Can boot with 550 mhz htt than the normal 456 mhz @ all dfi.

[gianni-gt]

Tried my 3800+ venice, quite nice chip. http://valid.x86-secret.com/show_oc.php?id=276624

And the 3500+ venice WR. http://valid.x86-secret.com/show_oc.php?id=276627 3669.91mhz

Unfortunately, the poor thing died @ 1.94v

my ex-wr-3500+ died also at these vcore

what temp & volt on your 3800+?

a good idea: write volt & temp in the validation

[stunned_guy]

Today I got an 4000+ 0626FPMW....gianni, I will hunt you

By the way: also got an X2 4200+ Manchester and an 3500+ Venice E3.

[gianni-gt]

tell me the last line....

[Turrican]

Congratz May he rest in peace...

@ Turrican
Much more otions for voltage:
2.0 v @ chip for example or 4.1 v @ dimms
Can boot with 550 mhz htt than the normal 456 mhz @ all dfi.

wow, i performances really awesome

[stunned_guy]

@ gianni
Looks like F60726 on the end, the other numbers I cant see...this was an ebay auction with a small picture

[gianni-gt]

hey guys check that only 24 of 54 left and bruce/stunned/me will own all s939 wrs

http://www.ripping.org/database.php?socketidwr=939

[Turrican]

hey guys check that only 24 of 54 left and bruce/stunned/me will own all s939 wrs

http://www.ripping.org/database.php?socketidwr=939

you're all crazy socket939 dudes

[gianni-gt]

turrican, you have to crack a wr or "you are dismissed"

[Turrican]

turrican, you have to crack a wr or "you are dismissed"

this is gonna be very hard, at least for socket939

[gianni-gt]

may be with a sempron, hehe

[knopflerbruce]

hey guys check that only 24 of 54 left and bruce/stunned/me will own all s939 wrs

http://www.ripping.org/database.php?socketidwr=939

Haha nice! Note that there is a Windsor there as well (please remove the damn thing from the 939 list), and I own a 3500+ sempron (same as 3400+ but with the incredible amount of 256kb cache!!!).

I have what I hope is a decent X2 4600+ manchester in the mail at home, but I need some cash to pay for customs

The 3200+ winch record could be hard. I have a chip, but not sure it's good enough. 3500+ newcastle/clawhammer - I don't have either of those. I THINK a newcastle is in the US somewhere, but I wont get it for a little while at least. 3800+ venice is a DAMN hard one. Hope the new CBBLE 0512 is great. The 0449SPAW sucked bigtime, horrible coldbug...

3800+ newcastle doesn't look too hard, but I don't even own a chip atm 4000+ clawie, no idea how great that score is. I'll try my CAAZC 0442GPMW next time I play with dice

FX53/55 claw... damn hard to get I think. My chips aren't good enough FX55 SD is mine as soon as I try it on LN2 That chip is as good as my 3700+, and with an unlocked multi it'll be alot of fun fsb360@dice/low temps. I'm pretty sure one of us have an FX57 that can beat before. I saw 4ghz on dice on a lousy pot, but got no valid...

X2 3600+ manchester is mine as soon as the chip arrives X2 3800+ manchester... don't have one yet. I expect to get a very nice Toledo soon, maybe I can crack that one X2 4200+ manchester, don't have one atm... That Toledo WR is too hard for my ACBWE I think X2 4600+ manchester, hopefully my new chip is good enough. Just need a little bit of cash so I can pick it up at the post office (damn taxes...) Opty 144,146,148 and 154 will be hard. My 144's didn't like that high fsb, maybe I can get the 148wr, but not sure until I get it and test it. Opty 154 will be DAMN hard!

may be with a sempron, hehe

I think I actually have one of each sempron that's not my own WR yet. I never make semprons pri1 But next session, maybe. I haven't got so many chips to test now...

[massman]

3500+ clawhammer WR will be mine, I have a good one coming in

[gianni-gt]

3800+ Venice will be mine (with cascade or ln2) fsb 375mhz on really low temps!! with my fx-57 i think i couldn't crack the wr of before...

will retest the following cpu's under dice: 3200+ (wr chip), 3400+ (wr chip), 4000+ (wr chip) and maybe once again the FX-57 but these temps are too much for dice... my idea: order ln2 for next weekend. but the minimum order is 50L and thats really too much for two amd chips....

next year i have to travel to germany to a oc-session with (hopefully) a quad-stage-cascade

[knopflerbruce]

3800+ Venice will be mine (with cascade or ln2) fsb 375mhz on really low temps!! with my fx-57 i think i couldn't crack the wr of before...

will retest the following cpu's under dice: 3200+ (wr chip), 3400+ (wr chip), 4000+ (wr chip) and maybe once again the FX-57 but these temps are too much for dice... my idea: order ln2 for next weekend. but the minimum order is 50L and thats really too much for two amd chips....

next year i have to travel to germany to a oc-session with (hopefully) a quad-stage-cascade

What stepping is that 3800+ again? some early LBBLE?

I hope my 3rd 3200+ isn't a San Diego as well... I want to compete against you

[stunned_guy]

@ gianni
where do you want do got to that session ?

@ massman
I also have one 3500+ clawhammer here without heat spreader but that 3.5 ghz are very hard.

@ bruce
yesterday I got my 5. FX-53, will try to go over 3.4 Ghz....
My first FX-53 was an AAABC 0409 UPMW but at that time I didn´t have the single stage and I didn´t know about overclocking.

[massman]

Stunned_guy, what does the chip do on air cooling? The chip I have incoming does this on aircooling using 1,55v and is most likely limited by the motherboard.



CBBHD stepping by the way

[Turrican]

in a few days mit opti 148 arrives. hope it will be a good one

[stunned_guy]

@ massman
i didn´t test with air cooling, but under single stage i got more than 3.1 ghz with default vcore....
my step is CAA2C 0507 BPMW.

by the way: you mean an 3500+ winchester like on the pic but i spoke about an clawhammer.