8800GT bios for better overclocking! *test*

[antari]

So does only changing the "Extra" voltage in NiBiTor cause the change to 1.10V? My Palit reference card has VIDs 1.10, 1.05, 1.00 and 0.95 but the Extra voltage selection is blank. The card clocks to 756/2124/1836 for 3D06 so far on stock air with stock BIOS.

TIA.

[RPGWiZaRD]

The card clocks to 756/2124/1836 for 3D06 so far on stock air with stock BIOS.

Just be happy if it really is stable, that's well above average result and would put a smile on my face if I had reached on stock cooler and volts.

[Diverge]

So does only changing the "Extra" voltage in NiBiTor cause the change to 1.10V? My Palit reference card has VIDs 1.10, 1.05, 1.00 and 0.95 but the Extra voltage selection is blank. The card clocks to 756/2124/1836 for 3D06 so far on stock air with stock BIOS.

TIA.

lots of cards have that field blank, as does mine. It's cause it actually has a different value at that address, which doesn't correlate to the known value in nibitor... at least that is what i think. I posted what i found in this thread a few pages ago.

Yours most likely is set to a higher value, even though it doesn't really set it to that value. whether it defaults down to the highest working value (1.1V) hasn't been verified.

click hex view in nibitor, then click the Extra voltage that is blank. it will jump to that address/value in the hex view and show you the value in hex. Now toggle through the values you can select and watch that hex value change... i bet yours was set to a higher hex.

[antari]

Mine in that address had hex 0x00

[Diverge]

Mine in that address had hex 0x00

weird, mine has a 0x82... which is 130 in decimal.. or 1.3V.. which obviously didn't really set it to that, since the max you can set is 1.1V.