Running 4GB at 975 fine here.Originally Posted by leoftw
Running 4GB at 975 fine here.
intel i7 3770k 4.40GHz
ASUS Maximus V Extreme
EVGA GTX 680 FTW
16GB GSKill 2400MHz
(1) OCZ Vertex 3 60GB SSD
(1) Samsung 840 Pro 256GB SSD
(1) 1.5 TB WD Caviar Green SATA
Sound Blaster X-Fi Titanium Fatal1ty Professional
Corsair 700D
Corsair AX850
Water Cooled (EK blocks on CPU and GPU, TA 120.4, DDC-1+ with XSPC ResTop)
I still have huge voltage drops even with these bios, Check it. My Memory went under 1.0 volts
My Rig can do EpicFLOPs, Can yours?
Once this baby hits 88 TeraFLOPs, You're going to see some serious $@#%....
Build XT7 is currently active.
Current OS Systems: Windows 10 64bit
Anyone out there who can help me with my X-Fi not working in first PCI Slot (above gfx) ?
My goodness that is very scaryI still have huge voltage drops even with these bios, Check it. My Memory went under 1.0 voltsMakes me think twice about getting this board . i don't want to screw my memory up
My old Audigy Platinum doesn't work in first PCI-Slot too. They're not detectet by Hardwaremanager. Only @ PCI-Slot 2 the Card are working.
Any Ideas to fix that to use it in Slot 1?
Intel w3520(G0)@4.2Ghz@1.35V@eVGA X58 3x SLI classified, Swiftech Apogee XT ultra, 6 GB (3 x 2GB) Mushkin XP3-120800 1600MHz 6-7-6-24@1.65V, GeForce 7900GTX, 3x 74er Raptor WD740ADFD, 2x 250er WD2500YS RE, 1x 160er Samsung SV1604, Corsair HX Pro 750W, 2x HP LP2475w"
Warboy, how is the cooling around your PWM/vReg... area? I've not once had the voltage drops like that! Ever so subtle fluctuations, but NOTHING that extreme! My PSU is a PC Power&Cooling SLi TurboCool 510w...I still have huge voltage drops even with these bios, Check it. My Memory went under 1.0 volts
| Asus nVidia 580 GTX @ 850MHz |
| Windows 7 x64 Ultimate | Mac OS X 10.6.8 | Mac OS X 10.7.2 |
| Intel Core i7 970 @ 4.2GHz | Gigabyte X58A-UD9 | 12GB Corsair 2000MHz 8-8-8-24 |
| HTC HD2 | MIUI 1.10.21 | Android 2.3.7 | TyTung 12.4 Kernel |
New Builds Coming Soon..
When I run OCCT, it doesn't show any graphs but I can see I need to link some software to it. What do you use??I still have huge voltage drops even with these bios, Check it. My Memory went under 1.0 volts
Mobo: Asus Maximus Formula SE (0802 Bios - Air Cooled using Thermalright HR-05 IFX coolers on NB & SB)
Proc: Intel C2Q Q9550 2.83ghz FSB1333 12mb (o/c to 3.41ghz 8.5x 400fsb) with Thermalright Ultra 120 eXtreme cooler
Mem: Kingston Hyper-X 2gb(2x1gb) 1066mhz 5-5-5-15 (KHX8500D2K2/2G)
VGA: XFX 8800GTS 640mb
PSU: Antec Neo HE 650w Blue
Case: Antec P182SE with 4x 120mm fans
Sound: Auzentech X-Fi Prelude (in PCI slot above graphics card)
Drives: Intel X25-M 80gb SSD - 36gb WD Raptor - 320mb Seagate SATA-II - 320gb Hitachi in an Antec MX-1 ESATA Caddy - Sony SATA DVD-RW
Op Sys: Win XP Pro
Display: Benq 24" Q24WS
Controls: Logitech G15 Keyboard and MX1100R Mouse
Printer: Epson R800
ISP: Be Value 12mb ADSL (England)
Use Everest. In the Everest Preferences you can setup which sensor information it can send to other applications. And in OCCT pick Everest and setup the sensors. Just make sure Everest is always open before OCCT or OCCT will lose it the settings for monitoring...
| Asus nVidia 580 GTX @ 850MHz |
| Windows 7 x64 Ultimate | Mac OS X 10.6.8 | Mac OS X 10.7.2 |
| Intel Core i7 970 @ 4.2GHz | Gigabyte X58A-UD9 | 12GB Corsair 2000MHz 8-8-8-24 |
| HTC HD2 | MIUI 1.10.21 | Android 2.3.7 | TyTung 12.4 Kernel |
New Builds Coming Soon..
What is changed in 0902 bios?
ftp://ftp.asus.com.tw/pub/ASUS/mb/so...ula/MF0902.zip
I'm prime stable here with qx9650 at 4400mhz 1,5Vcore under liquid, anyone have this cpu with this mobo?
Haven`t got that voltage drops when runnintg OCCT, but ionly with a C2D, perhaps, it`s a quad problem!?
Or your board, or psu?
I'm on a Quad and I don't get the voltage drops...
| Asus nVidia 580 GTX @ 850MHz |
| Windows 7 x64 Ultimate | Mac OS X 10.6.8 | Mac OS X 10.7.2 |
| Intel Core i7 970 @ 4.2GHz | Gigabyte X58A-UD9 | 12GB Corsair 2000MHz 8-8-8-24 |
| HTC HD2 | MIUI 1.10.21 | Android 2.3.7 | TyTung 12.4 Kernel |
New Builds Coming Soon..
[QUOTE=Warboy;2589590]I still have huge voltage drops even with these bios, Check it. My Memory went under 1.0 volts
0902 BIOS?
CPU: Lapped L727A861 Q6600 3.61GHz (450x8) (1.275VID) @ 1.700V BIOS. WC w/Apogee GTX + Cu top + custom backing plate
GPU: EVGA8800GT. WC w/MCW60 + RAMsinks
MB: ASUS Maximus Formula: Rampage Formula BIOS 0402. NB @1.61V BIOS. WC w/MCW30. FSBtV=1.38V BIOS. CPUPLLV=1.82V BIOS
RAM: Corsair Dominator PC2 8500 4x1GB 1066@1081. 2.14V BIOS
mine is working just fine in the top slot...is your card not being detected?
Q6600 L723A (400 x9)
Evga 780i P02
G.skill 8 GB
Evga GTX 280
Raptor X (3) 150's Raid 0
Targen BZ 1100w
Thermalright Ultra Extreme 120
Vista Ultimate x64
Xclio
I've tried all the bios 0202-0902 but yes, Right now I'm using 09020902 BIOS?I still have huge voltage drops even with these bios, Check it. My Memory went under 1.0 volts
My Rig can do EpicFLOPs, Can yours?
Once this baby hits 88 TeraFLOPs, You're going to see some serious $@#%....
Build XT7 is currently active.
Current OS Systems: Windows 10 64bit
Are you enabling LLC?I still have huge voltage drops even with these bios, Check it. My Memory went under 1.0 volts
ASUS Maximus Formula Special Edition / SE X38 RAMPAGE 0803 BIOS
Q6700
Lapped TRUE
G.Skill 8500 2x2GB
9600DT 512MB
X-Fi Extreme Music.
Samsung 1TB & 2 WD 200GB (trying to RAID)
PC Power & Cooling 750 (Black)
I can't help but to say these...
DEE DEE DEE
I've clearly stated before I have LLC enabled. If you look but, you can see all my settings for different overclocks.
My Rig can do EpicFLOPs, Can yours?
Once this baby hits 88 TeraFLOPs, You're going to see some serious $@#%....
Build XT7 is currently active.
Current OS Systems: Windows 10 64bit
Sorry I don't read all posts. I don't seem to have all these problems. I just really look to make sure new BIOS are good before I flash. And try to give some advice when I can.
Last edited by ShawnTRD; 11-29-2007 at 07:13 AM.
ASUS Maximus Formula Special Edition / SE X38 RAMPAGE 0803 BIOS
Q6700
Lapped TRUE
G.Skill 8500 2x2GB
9600DT 512MB
X-Fi Extreme Music.
Samsung 1TB & 2 WD 200GB (trying to RAID)
PC Power & Cooling 750 (Black)
Can you run OCCT Beta on Auto and show your graphs?
My Rig can do EpicFLOPs, Can yours?
Once this baby hits 88 TeraFLOPs, You're going to see some serious $@#%....
Build XT7 is currently active.
Current OS Systems: Windows 10 64bit
I'll try that tonight.
ASUS Maximus Formula Special Edition / SE X38 RAMPAGE 0803 BIOS
Q6700
Lapped TRUE
G.Skill 8500 2x2GB
9600DT 512MB
X-Fi Extreme Music.
Samsung 1TB & 2 WD 200GB (trying to RAID)
PC Power & Cooling 750 (Black)
Warboy,
so you are reading out the voltages with a program?
Wouldn't trust this a 100%, so relax.
Oscilloscope anyone?
- E6750 with Scythe Infinity- 120mm PWM
- 2x2GB ReaperX HPC PC2-8000
- Seagate 7200.10 500GB & 320GB
- Asus Maximus Formula S/E
- MSI NX8800GT-T2D512E-OC
- X-Fi Fatal1ty Platinum FPS
- Antec Quattro 850W
- Logitech DiNovo Edge & MX1000
- in a LianLi
is there any bios setting that need to be set for crossfire to
work on this mb
thanks
Good point, but thats why i want everyone to try it. If its the program, Everyone will get the same problem. I've already thought through itWarboy,
so you are reading out the voltages with a program?
Wouldn't trust this a 100%, so relax.
Oscilloscope anyone?
I'm telling OCCT to read volts and temps from Everest. So everyone that has everest, and OCCT Beta. See if you get these same problem on any X38 board.
My Rig can do EpicFLOPs, Can yours?
Once this baby hits 88 TeraFLOPs, You're going to see some serious $@#%....
Build XT7 is currently active.
Current OS Systems: Windows 10 64bit
Components: ASUS Maximus Formula, Intel QX9650, Corsair Dominator PC8500, Western Digital Caviar 320GB, Sapphire 3870 (2), Enermax Galaxy 1KW, Dell 3007
I put all this together yesterday, and am having very strange problem. I can only describe it as trying to watch a DVD on your tv, with the tv on channel 4 when it needs to be on channel 3. The display is split in half horizontally, with either the bios or desktop displayed in both the top and bottom sections. The display flashes in and out, and is striped vertically with pink and white stripes. I got it to go away only on the desktop by cranking the resolution up. But the bios still does it. The problem was there with the shipping bios 0401 I think, and is still there with 0901 (latest?)
I have installed all chipset drivers and VGA drivers, even did a new install of XP, and am stumped on what to do next.
Why do you always have to bring two sockets into everything?Because a one socket system is only 1/2 a system..
You got two balls don't you?
I rest my case!
http://www.usdebtclock.org/
@GunslingerOCS: So you are using both PCIe x16 slots and a sound card, which slot above or beneath gfx card ? I didn`t tried the slot beneath yet because my Raid controller gets real hot and i don`t want to heat it up even more by putting another card under it. Fact is i can`t get my X-Fi to work in the first PCI slot, can you ?
Posting Permissions
Reply With Quote
Bookmarks