Asus Striker Extreme vDroop Mod

[ineedaname]

Ok thnx for the info.
I'll just do the vdroop mod then.

But what motherboard is the one in the image?

I'm not 100% sure but I think it IS a striker extreme.
I don't really remember as it was posted so long ago.
Its either a striker or the P5N32E-SLI

Can you solder the wires to the back of the board instead of the top? Seems like it would be easier that way...

I am not an expert at soldering but I wouldn't attempt to solder the back of the board instead.
The reason is because these mobo's have at least 6 layers and u don't know if those connections on the back are the same as the front.

A big thx here from me !
I used to have a E6850 on a P5N32-E SLI and the Vdrop was hardly noticeable ( after the Bios-flash - the initial Vdrop was extreme ) ... all went fine ....
Then I change CPU to a Q6600 (SLACR) and started oc:
first thing I noticed "hi my dear friend Vdrop, you´re back again ... how has it been ?" -
Damn it, Vdrop @ 0,03V
Vdroop @ 0,05 V
After pencil-mod
Vdrop : 0,0
Vdroop : 0,0


So I could lower my Vcore@oc - so I got some degrees back again. To be precisely = about 5°C ( that brings me joy )
Q6600 @ load @1,28V@ 39°C (CPU-Temp)

Nice 2 hear that some ppl are still using the mod