Official GIGABYTE X38-DQ6/X38T-DQ6 Info/BIOS Thread

[Wakuwaku]

I am new to on this forum and i have a problem. I did read almost all topics but i did not saw anyone who had my problem.

My specs are:
DQ6 X38 board Bios F5g
4 GB 2x2GB OCZ Platinum memory 5-4-4-15
74GB Raptor
Leadtek 8800GTS
500GB Samsung Spinpoint
X-Fi sound
Hauppauge tv
Corsair modular power 620W
Antec P182 case
Q6600 G0
Scythe Mugen

Overclocking goes well, i run my system at 3.6GHZ now iand i feel it can be much faster than that.

I set i bios:
9 x 400 FSB
PCIe 100
Manual timings ram 4-4-4-12
Trd 10
Ram 2.00A 800Mhz PC6400
CPU 1.48v
PCIe +0.35V

My system does boot well but when i close my system and i restart it the next day my bios does not like the settings he gives a light click and resets himself to 266x9.

When i boot with default settings after a while i can set the 3.6 values and it boots like charm.

When i set 8 x 400 this also happens but then my system says it runs on 2.13
GHZ 8 x 266.

So my conclusion is, only the FSB resets himselves, all other values stay in the bios.

Does anyone have a solution for this?

Thanks in advance.