But did you know the MM case I ordered has 11x 120mm mounts?
(Duality front with Horizon back)
6 in Front for the RAD's
2 on Top
3 in Back
So the in/out ratio is 6:5
But did you know the MM case I ordered has 11x 120mm mounts?
(Duality front with Horizon back)
6 in Front for the RAD's
2 on Top
3 in Back
So the in/out ratio is 6:5
-
-
-
---------- Click Here For My Build Log ----------
--------- DangerDen Waterbox Lanbak ---------
Does anybody know, if the above suggestion is a good idea?
So this:
Airflow Outtake:
6 Fans in front (rads)
Airflow Intake:
2 Fans on top
3 Fans in back
Why I think it's a good idea:
The front doesn't need dustfilters, which I think are not so decorative. I rather see nice Led Fans and Fan Grills.
On top, the 2 fans will blow cool air right on the motherboard.
In back 2 fans will suck cool air in the case, under the motherboard.
1 Fan in back will blow over the motherboard.
I'm not an airflow specialist, so I hope you can give me some advise
-
-
-
---------- Click Here For My Build Log ----------
--------- DangerDen Waterbox Lanbak ---------
Updated startpost.
Also my watercooling setup has finally finished.
So ready to place an order at the shop with the best offer
-
-
-
---------- Click Here For My Build Log ----------
--------- DangerDen Waterbox Lanbak ---------
Watercooling setup arrived!!!
I've bought some distilled water and 2 cheapass waterpumps to test the setup.
It's a bummer I received the EK-Asus 1 Acetal set (I ordered the Acrylic), so I can't test the mobo set
But everything else I can, see the pics:
-
-
-
---------- Click Here For My Build Log ----------
--------- DangerDen Waterbox Lanbak ---------
NICE GEAR MAN!!! more updates!!
Originally Posted by skinnee
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Installed the blocks on my 8800 ultras
-
-
-
---------- Click Here For My Build Log ----------
--------- DangerDen Waterbox Lanbak ---------
That is the definition of watercooling pr0n
Nice parts, cant wait to see it set up
E4400 @ 3100Mhz 1.375v // P965 DS3 rev3.3 // 4GB D9GMH
EVGA 8800GT // Antec P182 Gun Metal // Corsair HX520W
Dell E172FP 17" TFT // Logitech MX1000 // Saitek Eclipse KB
Apogee GT // Maze 4 // Laing D5 // Swiftech MCR320-QP
mATX soon...
I wish I had that. Nice pics.
Clean that gpu block, please.
What is that white residue?
sexy blocks man but what is that white gunk man??
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
not gunk, it's condensation because of the hot water.
PC Lab Qmicra V2 Case SFFi7 950 4.4GHz 200 x 22 1.36 volts
Cooled by Swiftech GTZ - CPX-Pro - MCR420+MCR320+MCR220 | Completely Silent loads at 62c
GTX 470 EVGA SuperClocked Plain stock
12 Gigs OCZ Reaper DDR3 1600MHz) 8-8-8-24
ASUS Rampage Gene II |Four OCZ Vertex 2 in RAID-0(60Gig x 4) | WD 2000Gig Storage
Theater ::: Panasonic G20 50" Plasma | Onkyo SC5508 Processor | Emotiva XPA-5 and XPA-2 | CSi A6 Center| 2 x Polk RTi A9 Front Towers| 2 x Klipsch RW-12d
Lian-LI HTPC | Panasonic Blu Ray 655k| APC AV J10BLK Conditioner |
yeah it's condensation
-
-
-
---------- Click Here For My Build Log ----------
--------- DangerDen Waterbox Lanbak ---------
Looks nice so far, i see you also ordered @ aquatuning, good decision
Nice setup you got there, hurry up and give us more pics
System #1:
i7 975 for bench, W3540 @ 4,4 Ghz HT On, Asus P6X58 Premium, 3x2048 Corsair Dominator 2000CL7, Sapphire 5970 @ stock, Corsair HX1000, 1xOCZ Vertex2 120GB, 3x1TB WD Green
Cooled by:
Loop 1: Watercool HK rev 3.0, Laing Ultra 18W /w XSPC Res Top, Thermochill PA120.3 /w Phobya Fans @ 5V Pull
Loop 2: EK 5970 Nickle, Laing Ultra 18W /w XSPC Res Top, Thermochill PA120.3 /w Phobya Fans @ 5V Pull
Loop 3: EK Asus NB/SB, Mips Asus Mosfet 1 + 2, Laing Ultra 18W /w XSPC Res Top, Thermochill PA120.2 /w Phobya Fans @ 5V Pull
4,6Ghz (21x220) 1,42Vcore with Single Stage (HT enabled)
http://img402.imageshack.us/img402/1251/83962063.jpg
AMD @ testing
X4 955, Asus Crosshair III, same Rams as on Intel Setup, Sapphire 4870X2 @ Stock, PC Power&Cooling 910W
updates
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Can't give any updates this week.
Mountainmods STILL haven't shipped my case -_-
They say it'll ship this monday probably -_-...
And after shipment, it'll take another 5 days to arrive at my home...
AND Aquatuning.de made a mistake with my order.
I wanted the EK-Asus Mobo set Acrylic, but they sent me the Acetal version -_-
So I have to sent the Acetal back and have to wait for the Acryl.
BUT Aquatuning.de have not answered my questions/emails for the last 5 days :S
It's like now I've paid 800 euro's for the order (I even paid 10 euro as "tip"), I'm not getting any support anymore :S
Not quite happy here if you know what I mean...
-
-
-
---------- Click Here For My Build Log ----------
--------- DangerDen Waterbox Lanbak ---------
Get ready to wait on that case... I finally got mine yesterday, but it took a while.
Just make sure you call and remind them that you placed an order every once in a while. Seems like they'll forget about you if you don't remind them!
2600k @ 5ghz / z68 Pro / 8gb Ripjaws X / GTX 580 SLi
2x Inferno raid 0 / WD 1TB Black / Thermaltake 1200w
Dell 3008 WFP / Dual Loop WC MM UFO
Good luck with Aquatuning.
Your fan/airflow thinking sounds pretty right. Good air flow front and back of the board really helps with all 680i boards.
I'm now doubting about the airflow, because I forgot the PSU.
That one is an outtake too ofcourse.
So now it's like:
Outtake:
6 in Front for the RADs
1 in back from PSU
-
7
Intake
2 on Top
3 in Back
-
5
7:5
Hmmm...
-
-
-
---------- Click Here For My Build Log ----------
--------- DangerDen Waterbox Lanbak ---------
Updates:
- Still don't know what to do with the airflow/fan configuration...
- MM still not shipped my case, also not answering my emails last couple of days...
- Sent back the Acetal Mobo set to Aquatuning, they'll sent me the Acryl as soon as the Acetal are delivered at their firm.
- Updated my Striker Extreme BIOS to 1303 with succes
- Waiting.... waiting... sigh...
-
-
-
---------- Click Here For My Build Log ----------
--------- DangerDen Waterbox Lanbak ---------
cmon hurry before I explode :o
I like your style already, except I love acetal blocks more
(groetjes uit Tilburg)
The multiple screen Wallpaper topic!: http://www.xtremesystems.org/forums/...d.php?t=190723
The System wallpaper topic!: http://www.xtremesystems.org/forums/...d.php?t=180050
I'm already exploded wuahaha.
BUT YES!!!!!!!!!!!!
Just received a confirmation email from MM that my case is shipped today!!
Woohoooo
-
-
-
---------- Click Here For My Build Log ----------
--------- DangerDen Waterbox Lanbak ---------
Just a friendly word of advice. I hope the condensation has dried up completely. Don't let that condensation linger, especially on those acrylic see-through blocks. That's the beginning of algae growth. Just helping. Nice job so far.
wow... those ek are so beautiful...would love to have some numbers of the cpu block
"Study hard my young friend"[/B].
---------------------------------------
Woody: It's not a laser! It's a... [sighs in frustration]
You're right!
But how do I let it dry up?
The condensation is still there
-
-
-
---------- Click Here For My Build Log ----------
--------- DangerDen Waterbox Lanbak ---------
Unscrew the acrylic top and let it dry
Posting Permissions
Reply With Quote
Bookmarks