Quote Originally Posted by safan80 View Post
what voiltages in the bios are you using? Also are you running the beta occt? prime stable doesn't mean a thing with this board.
I'm running beta OCCT, I can't get anything stable in it, no matter what.

right now I'm using

Code:
Extreme Tweaker
Ai Overclock Tuner : Manual
OC From CPU Level Up : AUTO
CPU Ratio Control : Manual
- Ratio CMOS Setting : 9
FSB Frequency : 430
FSB Strap to North Bridge : AUTO
PCI-E Frequency: 100
DRAM Frequency: DDR2-1033
DRAM Command Rate : 2T
DRAM Timing Control: Auto
DRAM Static Read Control: AUTO
Ai Clock Twister : Strong
Transaction Booster : AUTO

CPU Voltage : 1.550
CPU PLL Voltage : 1.60
North Bridge Voltage : 1.65
DRAM Voltage : 2.22
FSB Termination Voltage : 1.50
South Bridge Voltage : AUTO
Loadline Calibration : Enabled
CPU GTL Reference : x67
North Bridge GTL Reference : x67
DDR2 Channel A REF Voltage : AUTO
DDR2 Channel B REF Voltage : AUTO
DDR2 Controller REF Voltage : AUTO
SB 1.5V Voltage : AUTO

NB LED Selection : NB Volt
SB LED Selection : SB Volt
CPU LED Selection : CPU VOlt
Voltiminder LED : Disabled

CPU Spread Spectrum : Disabled
PCIE Spread Spectrum : Disabled

Advanced CPU Configuration
CPU Ratio Control : Manual
- Ratio CMOS Setting : 9
C1E Suppport : Disabled
CPU TM Function : Disabled
Vanderpool Technology : Disabled
Execute Disable Bit : Disabled
Max CPUID Value Limit : Disabled