Son of a..
430x9 unstable
435x9 unstable
440x9 unstable
Could have been my backup power supply causing these problem? because right now the Antec is getting replaced for a 3rd time because it can't power my 8800GTX, so I'm using a older power supply, a 680W
My Rig can do EpicFLOPs, Can yours?
Once this baby hits 88 TeraFLOPs, You're going to see some serious $@#%....
Build XT7 is currently active.
Current OS Systems: Windows 10 64bit
what voiltages in the bios are you using? Also are you running the beta occt? prime stable doesn't mean a thing with this board.Originally Posted by Warboy
Asus Z9PE-D8 WS with 64GB of registered ECC ram.|Dell 30" LCD 3008wfp:7970 video card
LSI series raid controller
SSDs: Crucial C300 256GB
Standard drives: Seagate ST32000641AS & WD 1TB black
OSes: Linux and Windows x64
I'm running beta OCCT, I can't get anything stable in it, no matter what.
right now I'm using
Code:Extreme Tweaker Ai Overclock Tuner : Manual OC From CPU Level Up : AUTO CPU Ratio Control : Manual - Ratio CMOS Setting : 9 FSB Frequency : 430 FSB Strap to North Bridge : AUTO PCI-E Frequency: 100 DRAM Frequency: DDR2-1033 DRAM Command Rate : 2T DRAM Timing Control: Auto DRAM Static Read Control: AUTO Ai Clock Twister : Strong Transaction Booster : AUTO CPU Voltage : 1.550 CPU PLL Voltage : 1.60 North Bridge Voltage : 1.65 DRAM Voltage : 2.22 FSB Termination Voltage : 1.50 South Bridge Voltage : AUTO Loadline Calibration : Enabled CPU GTL Reference : x67 North Bridge GTL Reference : x67 DDR2 Channel A REF Voltage : AUTO DDR2 Channel B REF Voltage : AUTO DDR2 Controller REF Voltage : AUTO SB 1.5V Voltage : AUTO NB LED Selection : NB Volt SB LED Selection : SB Volt CPU LED Selection : CPU VOlt Voltiminder LED : Disabled CPU Spread Spectrum : Disabled PCIE Spread Spectrum : Disabled Advanced CPU Configuration CPU Ratio Control : Manual - Ratio CMOS Setting : 9 C1E Suppport : Disabled CPU TM Function : Disabled Vanderpool Technology : Disabled Execute Disable Bit : Disabled Max CPUID Value Limit : Disabled
My Rig can do EpicFLOPs, Can yours?
Once this baby hits 88 TeraFLOPs, You're going to see some serious $@#%....
Build XT7 is currently active.
Current OS Systems: Windows 10 64bit
if your getting error code 1 in occt you need to up the vcore.
Asus Z9PE-D8 WS with 64GB of registered ECC ram.|Dell 30" LCD 3008wfp:7970 video card
LSI series raid controller
SSDs: Crucial C300 256GB
Standard drives: Seagate ST32000641AS & WD 1TB black
OSes: Linux and Windows x64
I'm not getting a error code I'm getting lockups and reboots
My Rig can do EpicFLOPs, Can yours?
Once this baby hits 88 TeraFLOPs, You're going to see some serious $@#%....
Build XT7 is currently active.
Current OS Systems: Windows 10 64bit
DRAM Static Read Control: AUTO
Ai Clock Twister : Strong
Transaction Booster : AUTO
try to disable or lower the above setting to see any improvement !
3dmark vantage (hall of flame) World Top 4(Extreme)/ Top 5(high) and Top 10 (Performance)
OS: Vista Ultimate 32bit/64 bit
Processor: Intel Core i7 920
Mobo: Gigabyte EX58 Extreme F5g bios
Video Card: GeForce GTX 295 Quad SLI
PSU: Silverstone DA850 (850W single rail)
blu-ray rom : LG HDDVD/Liteon
Memory: DDR3 1600 2GX3
Sound: X-Fi Titanium Case: Antec P182
[SIGPIC][/SIGPIC]
In your sig your REV i wrong... 802 is the BIOS number the REV will be 1.02g ore 1.03g
GIGABYTE G1.Sniper M5 / intel i7 4770K @ ????Mhz / EVGA GTX 780Ti SC ACX / HyperX Beast DDR3-2400 DC 16GB / Seasonic Platinum-860w / Corsair 350D / AOC G2460P.
Cooled By H2o.
Posting Permissions
Reply With Quote
Bookmarks