My second run with E6850 @ dryice 5175mhz

[BeardyMan]

Setup :

ASUS P5K-E vcore mod
E6850 L723B576 @ 1.7V
Crucial ballistix PC6400
X1800XT coldbug, died lol

Picture of the setup:
SPI 1M @ 5104mhz, untweaked
Validation at 5175Mhz
My plans were 3D ofcourse but the card had a nasty coldbug, so i popped of the gpu container and remounted the air cooling, that worked fined for a few minutes but it was clear that the card was dieing lol.
I did the quick SPI 1M run first and due some condensation reason i was unable to rerun it at those speeds anyhow 9.9secs is always nice
AMD fanboy? who?

[Bigchrome]

Sick results! Can't wait to get my E6850!!

[toddm27]

nice runs, sorry to hear about the dying card

[GiaXi]

very good job...nice result!

[pablopawel]

I have one question:
Where you measure a V?? Windows or measure point ??

[Solarfall]

great scores there BeardyMan ... man i knew that cpu container would be a real killer with dry ice

[BeardyMan]

LOL it seems that my card has survived it afterall

within few weeks i have soem few days of, then i will spend time to get the max out of this cpu , will try to get an hold of LN2 and i will mod the board and i will make sure i have a bench disk dedicated for spi 1M ready

thx for the replies

[massman]

I have a dewar ... you have ln²?

J/k, great results, pot seems to be a blast.

[BeardyMan]

I have a dewar ... you have ln²?

J/k, great results, pot seems to be a blast.

haha my son, i have a dewar as well
i only can't get a hold of LN2



---> <----

[blind_ripper]

haha my son, i have a dewar as well
i only can't get a hold of LN2



---> <----

im still the only one that can get LN² :p , steven go to air liquid in antwerp they well tell u where u can get it close by

[mXpS]

I'm getting a new pot from Duniek and ill have to give my e6850 a hurting when it comes in

[KTE]

Very nice

Pots and their specs? Load/idle temps and vcore? Tried single core max yet? Whats max FSB on chip and board?

[BeardyMan]

Very nice

Pots and their specs? Load/idle temps and vcore? Tried single core max yet? Whats max FSB on chip and board?

Idle at 5.1ghz is 70.3°c, load is 68.5°c

Max fsb is unknown for me now
no single core yet.
Later more for sure

[MTP04]

Nice work. Looks like you have a strong E6850. I wonder how high it can go with ln2.

My E6850 has a low fsb wall at around 510 fsb on air.

[BeardyMan]

Nice work. Looks like you have a strong E6850. I wonder how high it can go with ln2.

My E6850 has a low fsb wall at around 510 fsb on air.

what board are you using?

I have a strong feeling my ASUS P5K-E is a part of this succesfull clocking...
the vanilla board felt less stable i can asure you that lol.

[KTE]

Thanks.

Steven some details of those pots now please.

Why are the L723B turning out awesome while the L726B turning out to be duds I tried a running L726B E6850 on P35 DS3 before picking the E6750 to test and it was walled at 468. Bad luck as I got back home and tested the newer E6750 to be walled at 478 on a P35 DS4, stable at only 472. I'm thrown off trying for another now honestly.

[BeardyMan]

Thanks.

Steven some details of those pots now please.

Why are the L723B turning out awesome while the L726B turning out to be duds I tried a running L726B E6850 on P35 DS3 before picking the E6750 to test and it was walled at 468. Bad luck as I got back home and tested the newer E6750 to be walled at 478 on a P35 DS4, stable at only 472. I'm thrown off trying for another now honestly.

http://www.xtremesystems.org/forums/...d.php?t=166584

this should anwser enough about the pots i guess

Well about those cpu's it's just a draw of luck

btw, give the asus P5K a shot it's worth it...

[KTE]

Thanks Steven.

Did you make the pots yourself or get them made? If I have enough time in the upcoming months I might make some.

Will give Abit boards a go and then maybe one of the ASUS. Since I don't buy anything myself, I have to wait before travelling hundreds of miles to pick it up and I don't have the hours free for that at all. I'll probably pick up an E6850 again instead.

[MTP04]

what board are you using?

I have a strong feeling my ASUS P5K-E is a part of this succesfull clocking...
the vanilla board felt less stable i can asure you that lol.

I got the same board as you, P5K-E wifi. But we all know every board, even the same model boards clock differently. I just might not have a good one.

[BeardyMan]

Thanks Steven.

Did you make the pots yourself or get them made? If I have enough time in the upcoming months I might make some.

Will give Abit boards a go and then maybe one of the ASUS. Since I don't buy anything myself, I have to wait before travelling hundreds of miles to pick it up and I don't have the hours free for that at all. I'll probably pick up an E6850 again instead.

They are made by someone else as i wish to

[nFo]

Nice, great clocks.

What's your nickname on: www.tweakers.net ?

[BeardyMan]

Nice, great clocks.

What's your nickname on: www.tweakers.net ?

i'm not on tweakers.net.

[BeardyMan]

I tried LN2 today, result aren't bad strange thing was that i could bench spi and 3D at same speeds (5333mhz)

what's the bottleneck my friends?

Link

[tiborrr]

Hard FSB wall.

[nFo]

i'm not on tweakers.net.

Nieuwe Map, sounds dutch to me.