No, at 1.46V for the Gpu, i can push the card at 880mhz, and reach 900mhz if i lock the shaders at 2100mhz.
but my performance decrease when the gpu run over 860mhz, so i set the card on 850/1000, i reach my best scores with this settings.
So Actually my card run at 850/1000 Vgpu: 1.36V full since the last two weeks
Last edited by Spideroz; 11-18-2007 at 03:16 PM.
My score lowers too over 810 core even though it is fairly stable. I guess we maxxed out the GPU.So are you going to get a G92 8800GTS in 2-3 weeks? I'm debating it...it should have the same PCB and same vmod but I might wait and get the GX2. That is 1.36v idle right?
What gpu block are you using and what ambient temps do you have? 39º running atitool is very good considering the vgpu you´re using.. and that´s a great card for sureOriginally Posted by Spideroz
No, at 1.46V for the Gpu, i can push the card at 880mhz, and reach 900mhz if i lock the shaders at 2100mhz.
but my performance decrease when the gpu run over 860mhz, so i set the card on 850/1000, i reach my best scores with this settings.
So Actually my card run at 850/1000 Vgpu: 1.36V full since the last two weeks
Spideroz
pls detail your mod with pictures
maybe you are doing something different for OVP
Hi guys, i'm using a WaterBlock CHIPSET NexXxoS NBX-i, and my ambient temps was 20° celsius during the test.
In my system i just have another waterblock for the cpu and both are cooled by a blacklord radiator with four 120mm fans.
it's true than over 1.36V for the Vgpu, the gain is not really interesting with my watercooling, that's why i set my card to 1.31V idle, 1.36full and reach 850/1000, it seems to be the best settings for me.
For the detail of my Vmodd, i don't have a lot of pictures, in fact, i just took one with my old camera, and the quality is pretty bad :p
For this mod i do nothing particular and i just follow this guide using a 1000ohm Vr.
Last edited by Spideroz; 11-19-2007 at 07:53 AM.
does your RAM get really got??
also this chip here that you have a heatsink on
is it necessary to be on it as well???
I don't have a problem with temps there. I'll whip out my BRAND NEW TEMP PROBE!
brb...
lol
i have ram sinks on my ram...smaller copper ones and during ATI tool load they get hot >> you can't rest the finger on the sink for very long....heheheh
i haven't touched that chip though but stock cooler does cover it
Ok so here's what I got...lol
i have ram sinks on my ram...smaller copper ones and during ATI tool load they get hot >> you can't rest the finger on the sink for very long....heheheh
i haven't touched that chip though but stock cooler does cover it
I couldn't get to the front of the card because my the angle... My CM 5 has good airflow
Back of card:
MOSFET area: 27C
Random areas: 25C
GPU core area: 27C
Front side:
RAMsink (idle): 31C
Near top of heat pipe (idle): 31C
GPU:
Idle 39C (RivaTuner)
Gonna do load now.
Last edited by Hazaro; 12-08-2007 at 11:14 AM.
Reply With Quote
Bookmarks