Hey guys, so I have the first template so we can copy and post our specs and share them. It took a while, so please give me feedback if I'm missing something important here. This is based on my current specs. Once we have it nailed and final I will post it on the front page. I still need to know how to sumbit in ina better way, respecting spacing... :-(

Thanks

Advanced

COnfigure Advanced CPU Settings
-----------------------------------------

Manufacturer: Intel
Brand String: Intel (R) Core(TM) 2 CPU 6600 @ 2.40GHz
Frequency: 3.01Ghz
FSB Speed: 1072Mhz
Cache L1:
Cache L2:
CPUID:
Ration Status: Locked (Max: 09 Min 06)
Ratio Actual Value: 9

-------------------------------------------

Ratio CMSO Setting [9]
C1E Support [Disabled]
CPU TM Function [Enabled]
Vanderpool Technology [Enabled]
Execute Disable Bit [Enabled]
Max CPUID Value Limit: [Disabled]
Intel Speedstep EIST [Disabled]


Ai OVerclocking Tuner : [Manual]
CPU Ration Control : [Auto]
Ratio CMOS Setting :
FSB Strap to North Bridge: [Auto]
FSB Frequency : 333
PCIE Frequency : [Auto]
DRAM Frequency : [DDR3-1333Mhz]
Dram TIming COntrol : [Auto]

Pri. Information:

CAS# Latency :
RAS# to CAS #Delay :
RAS# Precharge :
RAS# Active Time :
RAS# to RAS# Delay :
Row Refresh Cycle Time:
Write Recovery Time :
Read to Precharge Time :

Sec. Information:

Read to Write Delay (S/D) : [Auto]
Write to Read Delay (S) : [Auto]
Write to Read Delay (D) : [Auto]
Read to Read Delay (S) : [Auto]
Read to Read Delay (D) : [Auto]
Write to Write Delay (S) : [Auto]
Write to Write Delay (D) : [Auto]

DRAM Static Read Control : [Auto]
DRAM Dynamic Write Control: [Auto]

Ai Clock Twister: [Auto]
Ai Clock Skew for Channel A: [Auto]
Ai Clock Skew for Channel B: [Auto]

**** Please key in voltage numbers directly! ****

CPU Voltage: [1.2750]
CPU PLL Voltage: [Auto]
FSB Termination Voltage [Auto]
DRAM Voltage [Auto]
North Bridge Voltage [Auto]
South Bridge Voltage [Auto]
Clock Over-Charging Voltage [Auto]

**************************************************

CPU Voltage Damper [Auto]
CPU Voltage Reference [Auto]
North Bridge Voltage Referemce[Auto]
CPU Spread Spectrum [Disabled]
PCIE Spread Spectrum [Disabled}