New EK CPU block!!

[zbogorgon]

and I bring the most important news

Test System
Intel Intel QX6850@3600MHz (360x10), 1.45V
Abit IP35-Pro
Enermax Galaxy 1000W
Crucial Balistix Tracer 8500
Radeon HD2900XT 1GB

Water Loop:
Iwaki MD-20R pump
BlackIce Xtreme II radiator
cca. 2m 1/2 ID tubing
EK reservoir

I used my custum mounting for all the blocks. It has custum backplate, M4 screw and quite strong springs. This also means that i had to widden mount holes on Fusion and Apogee.

I tested with dual Orthos Prime Small FFT's, priority 9, 10min For temperature I used Core Temp for core temperatures and Fluke for water temp.

The graph shows delta temperature, average temperature of all 4 cores - water temp.

I didn't measure flow rate, but it is noticable slower than with Apogee or Fusion. Will do that in near future. And for this test I used the most restrictive variation of Supreme block



p.s. Prototype XY is different block we are working on, it is less restritive, it is not clear if it will ever see the world