Quote Originally Posted by andressergio View Post
Thanks RLM

I tried ALL bios..same failure at same time always...I think i just tried all unless some magic combination can make it prime95 stable...i think is the batch...

Same with this new one and also strange temps reported as i posted before, also less performance, i had all bioses tested on everest and stored...311 still performs better

I never updated on windows always used an external notebook usb hd

Thanks
Sergio
With my L723A I had to ONLY change voltage settings for CPU to 1.48 ( i think) and I run my ballistix 8000 4X1 sticks at 2.3 to 2.35 I have a fan blowing across them from the side, and I got 3.6 on the CPU. It has a vid of only 1.200! but it will eventually fail prime above that at ANY voltage.
I was beginning to suspect the board, but I got a L731A that does 3.9 easy.
so I would say the L723A's max out around 3.6.. Also i ran my mem at 5-5-5-15 with no other mem settings changed. Could you try a beefier power supply?

Also I am using 505 bios, works good for me, so sticking with it for now.

Nostromo