Quote Originally Posted by jagt View Post
Blah, anything over 460FSB is definitely a no-go on this setup. After 455 things start getting flakey, but anything below seems stable. CPU does 3750MHz at my current vcore, so that's not the problem. Is this a normal wall to hit with a quad? Anything I can do about it? My goal was 462 FSB for around 3.7GHz with memory at a 5:6 ratio for around 1110MHz. So far I've established that both CPU and memory will do these frequencies fine, but and mentioned the motherboard appears to be holding me back.
i say that you are very close to the top end of a Q6600.

you need to post all your voltages that you are using and what higher voltages you tried to support a higher overclock.

i see that you are using 4 x 1Gb sticks...probably that is your problem from going any higher.