Hey RLM
with your settings i could boot:
500x6 and 500x7 but loose 2 cores, cpuz reports 2 cores only and unstable...
I tried that same setting for 450x6 and same situation, needs like 1,5Vcore to be stable at 3,6
guess i have to accept that goes only till 3,5Ghz at vcore=1,45
Also i have a big hole between 470x7 and 490x7 can't even boot
but i can at 500x7 and beween 464x7 and 470x7 VERY unstable...
I tried various combinations but with no luck
Best regards
Sergio
Intel Core i9-7980XE@ 4.8GHz 18C/18TH (Direct Die Contact)
ASRock X299 OC Formula
ADATA XPG SPECTRIX D80 (4x8GB) DDR4-3800C17 B-Die
1x Intel Optane SSD 905P 480GB
4x HP EX950 NVMe 2TB on ASRock ULTRA M.2 CARD
EVGA RTX 2080TI KINGPIN 2190/8000 Stock Cooling AIO 240
SilverStone ST1500W-TI TITANIUM
Alphacool Custom Water Cooling
That's interesting andressergio, I'm limited to 470, but haven't considered the fsb hole and trying 500.
As I say it really varies from setup to setup. I know recently NCSA and I had pretty much identical setups with the DFI, and settings that were good for me, didn't work for him at all.
A bit more experimentation maybe, or as you say accept 3.5.
RLM
QX9650@4.5ghz Vapochill LS
E8600 (Boxed)
Rampage Extreme
OCZ Gold DDR3 (8500) 1680 7-6-6-20-2T
4870x2 Vmodded + Ek Nickel
9800GX2 Vmod + EK H20 (Stored)
Thermaltake TP 1000W
Lian Li P007 Case
Posting Permissions
Reply With Quote
Bookmarks