the way i have the nf4 sit's very snug... i don't think i need to change it...i'll try the other way.. and see what sit's better...Originally Posted by Jedda
having either shouldn't matter yeah??
the way i have the nf4 sit's very snug... i don't think i need to change it...i'll try the other way.. and see what sit's better...
having either shouldn't matter yeah??
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
It would've mattered for clearence on my GTX. The Screw head is different to the 680i screw head, so that it can sit flush into both spring and block when tight. Nothing sticks up higher than the top of the acetal. My vid card runs over the top of one screw just a few mm higher.
oh ok... I'll swap it around then...
i emailed eddy to send out my missing mounting gear no reply as of yet...
cheers
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
SMALL UPDATE...
leak testing my ek blocks... (sorry about bad lighting it's 8pm @ night)
I touched the bottom of my pump... wow i didn't realize how it gets when everyone said it get's really hot there not kidding!!!
Just to show everyone contact with ek 680i mofset block is good.. middle chips get contact but with a backplate it would be perfect...
i think my gf has 2 much time on her hand's lol
That's all for now more update's soon...
Last edited by disruptfam; 11-05-2007 at 06:02 PM.
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
small update
Got my ram today.... 4gb g-skill DDR2 800 (PC6400 - 6400PHU2-2GBHZ) 4-4-4-12 2.1v
4gb ram for a bargaintastic price...
that's all for now more updates soon!!
cheers
Last edited by disruptfam; 11-05-2007 at 06:05 PM.
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
*jealous*
grats man
LOL cheers mate*jealous*
grats man
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Hey hey! Damn, same ram, same amount of it and about to install Vista X64! I seen this before
You won't be disappointed m8! 4GB and Vista X64 runs super-fine for me.
• - Asus P8Z68-V PRO
• - Intel I5 2500k @ 4.5Ghz (for now)
• - Asus Geforce 580GTX DirectCUII Fermi
• - 16GB Corsair Vengeance Low Profile
• - Ultra X3 1000 Watt
• - Asus Xonar DX 7.1 \ Klipsch Promedia 2.1 THX
• - Corsair Vengeance 1300 Gaming Headset
• - Crucial M4 SSD 128GB \ WD Caviar Black 1TB
• - CoolerMaster 690II Advanced
• - Dell UltraSharp 24''
• - Noctua NH-D14
January - SLI Rig Of The Month (2008)
woohoo!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Hey hey! Damn, same ram, same amount of it and about to install Vista X64! I seen this before
You won't be disappointed m8! 4GB and Vista X64 runs super-fine for me.
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Hey
i didnt read the whole thread but i was wondering where you got the ram from
Hey Pat, you're missing a star!
www.itsdirect.com.au
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
I don't get it
• - Asus P8Z68-V PRO
• - Intel I5 2500k @ 4.5Ghz (for now)
• - Asus Geforce 580GTX DirectCUII Fermi
• - 16GB Corsair Vengeance Low Profile
• - Ultra X3 1000 Watt
• - Asus Xonar DX 7.1 \ Klipsch Promedia 2.1 THX
• - Corsair Vengeance 1300 Gaming Headset
• - Crucial M4 SSD 128GB \ WD Caviar Black 1TB
• - CoolerMaster 690II Advanced
• - Dell UltraSharp 24''
• - Noctua NH-D14
January - SLI Rig Of The Month (2008)
Six stars in the Southern Cross -Crux Australis- plus one large seven pointed star under the Union Jack, makes up the aussie flag. Pat the rat (long running Oz TV character) lost one in his/her avatar.I don't get it
I REALLY don't get itROFL
• - Asus P8Z68-V PRO
• - Intel I5 2500k @ 4.5Ghz (for now)
• - Asus Geforce 580GTX DirectCUII Fermi
• - 16GB Corsair Vengeance Low Profile
• - Ultra X3 1000 Watt
• - Asus Xonar DX 7.1 \ Klipsch Promedia 2.1 THX
• - Corsair Vengeance 1300 Gaming Headset
• - Crucial M4 SSD 128GB \ WD Caviar Black 1TB
• - CoolerMaster 690II Advanced
• - Dell UltraSharp 24''
• - Noctua NH-D14
January - SLI Rig Of The Month (2008)
There's supposed to 7 stars on his flag but there is not!!I REALLY don't get it
Last edited by disruptfam; 11-08-2007 at 07:40 PM.
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
UPDATE!!!
Got my scythe kaze ultras today!!!
Thickness difference.... Scythe on the right...
Giving my fan's a bit of a test.... right to left antec tri-cool > lian li case fan > scythe kaze ultra 2000rpm x2
that's all for now
ENJOY!!!!!!!!!
Last edited by disruptfam; 11-08-2007 at 08:31 PM.
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Those look like sick fans... how much were they?
i got them $20each is Aus... $12 in US abit pricey but think there worth it... there fairly quiet there is a slight buzzing noise @ full speed @ medium they still blow a fair of air but are alot quieter, but i think will improve when i run the fan's for awhile... .I'm getting a yate loon medium in and i have a couple fan's hanging around the house i would like to compare to the scythe ultras kaze's...
I will let everyone know how they compare...
http://www.scythe-usa.com/product/ac...38_detail.html
Last edited by disruptfam; 11-08-2007 at 08:32 PM.
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Awesome, but I agree, $12 is a tiny bit on the pricey side. Keep us updated!
Yes please do. I'm particularly interested in comparison to the D12SM-12 your getting. I just ordered a couple more YL SM's from Petra because I wasn't sure on how quiet these Ultra Kaze's are.
Do they list a static pressure number anywhere on/in the packaging?
Circles SucQ!
If your annoyed by sigs telling you to put things in your sig, then put this in your sig
Bribery won't work on me...just say NO to AT!!!
Will doAwesome, but I agree, $12 is a tiny bit on the pricey side. Keep us updated!
Last edited by disruptfam; 11-09-2007 at 06:47 AM.
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Nah sorry mate it's not listed on the packaging i had a look for ya...Yes please do. I'm particularly interested in comparison to the D12SM-12 your getting. I just ordered a couple more YL SM's from Petra because I wasn't sure on how quiet these Ultra Kaze's are.
Do they list a static pressure number anywhere on/in the packaging?
But i found this....
http://www.overclock3d.net/news.php?...tic_pressure/1
hope that helps...
I will also be trying scythe's newest fan the slip stream series.. they are in stock @ petra's
this one.... 33dba 88cfm 1600rpm
http://www.petrastechshop.com/12scsysstcaf3.html
I'm just playing with the fan's i have atm...
I was surprised how quiet my Xinruilian RDL1225S 120 mm fan is and seems to blow a fair bit of air... i wish i had the tools to measure cfm/dba
cheers!!
Last edited by disruptfam; 11-13-2007 at 07:22 AM.
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Wow, these fans are sexy... Might look for them sometime in the future. Keep it up!
• - Asus P8Z68-V PRO
• - Intel I5 2500k @ 4.5Ghz (for now)
• - Asus Geforce 580GTX DirectCUII Fermi
• - 16GB Corsair Vengeance Low Profile
• - Ultra X3 1000 Watt
• - Asus Xonar DX 7.1 \ Klipsch Promedia 2.1 THX
• - Corsair Vengeance 1300 Gaming Headset
• - Crucial M4 SSD 128GB \ WD Caviar Black 1TB
• - CoolerMaster 690II Advanced
• - Dell UltraSharp 24''
• - Noctua NH-D14
January - SLI Rig Of The Month (2008)
cheers mate
No, I think he had a date tonight...
He and his EK Supreme are out for a night on the town!
Posting Permissions
Reply With Quote
Bookmarks