Mod bios installed and all is ok. RH very quick with mod, thanks guys. My 6400 runs very good on this board. I do need some heatsinks for voltage regulators on this board they get very hot when i push it and may be limiting my oc. Who sells good heatsinks for these small power chips
Yes the A09.RXX works well! I cut some larger heatsinks up so that they fit the power chips. Glued them on with thermal epoxy. What is your user name at RHCF? Of did you not join?
Biostar T-Power I45 Motherboard
P45AA918 BIOS
E8600 450x9 1.35V
Danger Den Water Cooled
2x1Gig Super Talent PC6400 5-5-5-15
EVGA 7800GS
WD SATA 120GB
Rosewill 750W
Board has arrived
edit*
runs smooth on boxed cooling3.4ghz with ease ^^
Last edited by BeardyMan; 10-31-2007 at 05:34 AM.
never joined at RH. I have downloaded many bios from there site. Are you able to tell if it helped your oc or just cool the board with heatsinks.Originally Posted by JWilson
No, it doesn't help the OC. Just gives the power fets some lower temps.
Biostar T-Power I45 Motherboard
P45AA918 BIOS
E8600 450x9 1.35V
Danger Den Water Cooled
2x1Gig Super Talent PC6400 5-5-5-15
EVGA 7800GS
WD SATA 120GB
Rosewill 750W
guys were can i change cas latency?
Try updating the BIOS first
オタク
"Perfection is a state you should always try to attain, yet one you can never reach." - me =)
update bios if not already and use memsetguys were can i change cas latency?
updating bios was not really a good idea
memset can't apply cas 4.
N56BAB01.BST is on the Tiawan site and I understand from the Admin of Rebels Haven that a mod adding the 5 new memory settings will be posted in a few hours.
Biostar T-Power I45 Motherboard
P45AA918 BIOS
E8600 450x9 1.35V
Danger Den Water Cooled
2x1Gig Super Talent PC6400 5-5-5-15
EVGA 7800GS
WD SATA 120GB
Rosewill 750W
what do you mean? it won't apply or it restars after the setting ?
Doesn't matter anymore. Board refuses the work.
I shouldn't have flashed that bios 612
Anyone else try the new Rebels Haven N56BAA09.RXX Mod BIOS? My best so far has been the mod 612. Lets me reach 315 HTT, and it's the only one that has let me run stable with the settings in my sig. I've tried all the others, modded and stock, to no avail.
Biostar TF560 A2+ / 4000+ AM2 Brisbane / 150GB Raptor / OCZ 520w Powerstream
287HTT @ 9.5 x OC'ed to ~ 2727 @ 1.44v - load temp @ 38C
Crucial Ballistix 2GB (2 x 1GB) DDR2 6400 @ 1090 MHz / 5 - 5 - 5 - 18 -26 - 2T @ 2.2v
ATI x1950 Pro / Case: CM 690
Logitech Z-640 5.1 w/ Onboard Audio / Westy 22in Widescreen
Everything you need to know about Power Supplies____Heatware
gOdM@n: I just carry my Dell Vostro into the bathroom, but before I bought my Vostro, I thought about how cool it would be to have a desktop on there. Toilet gaming is probably the most comfortable seat you can ask for. I'd probably end up being asked to come into competition, but I don't think they'd provide a toilet for me there.
Last edited by jiggamanjb; 11-02-2007 at 10:07 AM. Reason: sig
what's the max HTT on that Biostar?
My board works again lol
Latest modded bios on that rebel site.
Funny thing is, it refused to work with 2800+ sempron / 6000+ and my two setts of ddr2, now it works with my sempron 2800+ and dual channel works again
strange board, i have a felling that i will not be able to get the WR with this board.
edit*
must rethink that lol, works flawlesly now.
This is boxed cooled at 1.6V vcore and 2.2V vdimm chipset at 1.300V
Last edited by BeardyMan; 11-02-2007 at 11:25 AM.
The Admin at Rebels Haven is advising not to flash Beta BIOS N56BAB01.BST that is on the Tiawan site. He's reporting Windows hanging on start up, and BIOS corruption of the next flash. The corruption renders the system dead.
Biostar T-Power I45 Motherboard
P45AA918 BIOS
E8600 450x9 1.35V
Danger Den Water Cooled
2x1Gig Super Talent PC6400 5-5-5-15
EVGA 7800GS
WD SATA 120GB
Rosewill 750W
I think someone got 370ish
what are your temps at that?My board works again lol
Latest modded bios on that rebel site.
Funny thing is, it refused to work with 2800+ sempron / 6000+ and my two setts of ddr2, now it works with my sempron 2800+ and dual channel works again
strange board, i have a felling that i will not be able to get the WR with this board.
edit*
must rethink that lol, works flawlesly now.
This is boxed cooled at 1.6V vcore and 2.2V vdimm chipset at 1.300V
Biostar TF560 A2+ / 4000+ AM2 Brisbane / 150GB Raptor / OCZ 520w Powerstream
287HTT @ 9.5 x OC'ed to ~ 2727 @ 1.44v - load temp @ 38C
Crucial Ballistix 2GB (2 x 1GB) DDR2 6400 @ 1090 MHz / 5 - 5 - 5 - 18 -26 - 2T @ 2.2v
ATI x1950 Pro / Case: CM 690
Logitech Z-640 5.1 w/ Onboard Audio / Westy 22in Widescreen
Everything you need to know about Power Supplies____Heatware
gOdM@n: I just carry my Dell Vostro into the bathroom, but before I bought my Vostro, I thought about how cool it would be to have a desktop on there. Toilet gaming is probably the most comfortable seat you can ask for. I'd probably end up being asked to come into competition, but I don't think they'd provide a toilet for me there.
370 HTT is not bad at all...
good one..
39° C
nice! what's your cooling?39° C
Biostar TF560 A2+ / 4000+ AM2 Brisbane / 150GB Raptor / OCZ 520w Powerstream
287HTT @ 9.5 x OC'ed to ~ 2727 @ 1.44v - load temp @ 38C
Crucial Ballistix 2GB (2 x 1GB) DDR2 6400 @ 1090 MHz / 5 - 5 - 5 - 18 -26 - 2T @ 2.2v
ATI x1950 Pro / Case: CM 690
Logitech Z-640 5.1 w/ Onboard Audio / Westy 22in Widescreen
Everything you need to know about Power Supplies____Heatware
gOdM@n: I just carry my Dell Vostro into the bathroom, but before I bought my Vostro, I thought about how cool it would be to have a desktop on there. Toilet gaming is probably the most comfortable seat you can ask for. I'd probably end up being asked to come into competition, but I don't think they'd provide a toilet for me there.
probably some quality air cooler..
Boxed cooler ain't what i call quality
I tried to boot at 350Mhz and it seems it's very easy .
Going to drop the muti and see how far i can go
Very fine results with that setup BeardyMan
yeah but i was expecting moreVery fine results with that setup BeardyMan
MORE !!
I can only do 3500mhz spi 1M on that boxed cooler and 400mhz fsb boots into windows, but it's not running at that setting
400*7 gives -->10*200 LOL
You need something WAY better than stock cooling
Posting Permissions
Reply With Quote
Bookmarks