Barcelona Opteron 2350(B1) arrived

[kyosen]

I had been a bit busy, sorry.

Max FSB is around 245 for 2350(B1) on my KFSN4-DRE so far,
still Vcore&Vnb is 1.20~1.25V area, though...
...I intend to do voltage mods on this server board

BTW, Franck/cpuz is working hard for K10 support
Now CPU-Z can show NB clock, each core clock/multiplier, memory acccess ganged/unganged...

...and memory clock calc method is changed for K10...ratio against FSB, same as Everest.
It means that I had compared K10(BA) at 333MHz memory clock and K8 at 300MHz memory clock...
...comparison for K10(B1) and K8 was no problem, both were 333MHz memory in stock setting.
Then I tried again SuperPI4M for K10(B1) and K10(BA) at same core/NB multiplier.
I had expected ~1% = 1~2sec difference, but there isn't such a difference.
So, I was misunderstanding...now I should say B1 and BA is almost same performance,
at least for SuperPI.
Yeah s7e9h3n was/is right