Quad Core OC Database

**ante_ante** · 10-23-2007, 12:34 AM

Can someone give me a link to where i can find prime95 for quads ?

Just got my new Q66 G0 yesterday and running 400x9 at 1,4vcore so i want to prime a little for stability ^^

Batch: L727B199 anyone got that batch ?

**jagt** · 10-23-2007, 01:26 AM

Originally Posted by Turbodream

Can someone give me a link to where i can find prime95 for quads ?

Just got my new Q66 G0 yesterday and running 400x9 at 1,4vcore so i want to prime a little for stability ^^

Batch: L727B199 anyone got that batch ?

Yeah, I have the same batch. Where did you order it from? Got mine from netshop.no. I haven't had the time to test mine any yet, though.

**ante_ante** · 10-23-2007, 04:43 AM

Originally Posted by jagt

Yeah, I have the same batch. Where did you order it from? Got mine from netshop.no. I haven't had the time to test mine any yet, though.

Got mine from datorbutiken.se here in sweden

**MikeB12** · 10-23-2007, 04:50 AM

Originally Posted by Turbodream

Can someone give me a link to where i can find prime95 for quads ?

Just got my new Q66 G0 yesterday and running 400x9 at 1,4vcore so i want to prime a little for stability ^^

Batch: L727B199 anyone got that batch ?

http://www.mersenneforum.org/showthread.php?t=9349

Multi core systems

When attempting to stress test a multi core system using Prime95 is necessary to use the current beta version 25.x which is freely available for download here. Otherwise, the current stable version will only stress one of your cores requiring you to as as many instances of the program as you have cores. For example, on a Core 2 Duo (with 2 cores) you would need to run two copies of Prime95 at the same time. The Orthos tool is available to automate the task of starting multiple processes and setting their affinity to the available machines. Orthos uses the Prime95engine so results are similar. One word of caution about Orthos is that it can only stress two cores per instance. If you have a quad core chip, you'll have to run two instances of it and manually set thecpu affinity (through the task manager) which can be annoying.

**jinu117** · 10-23-2007, 06:02 AM

This is where it stops... I will need to modify the board to go furhter

1) Q6600 G0
2) Week: L727A856
3) CPU-Z Validation : http://valid.x86-secret.com/show_oc.php?id=258568
4) 4.365 Ghz;Prime 95 stable.
5) Phase change made by me (cryostar edition). Tuned for 250W.
6) Voltage: Was set at 1.7 in bios.
7) Asus P5K-E. Stock no mod.

Time to hit the sack.

**billdavis** · 10-24-2007, 04:20 AM

Jinu117 your making your old phase systems look bad

**OnDborder** · 10-24-2007, 11:27 AM

jinu117, I like that work station you got there.. The fire extinguisher really sets off the decor..

**jinu117** · 10-24-2007, 02:03 PM

In all honesty, the oldie isn't bad at all.
In fact, oldie might be quite excellent on Penryn to be released from some news I am gathering.

Man you are 2nd person to comment on the fire extingusher lol... just following OSHA... :P I actually need to get couple more, one next to CNC mill and one next to laser engraver...

**=Pseudo=** · 10-25-2007, 01:17 AM

I already had 4 Quads and this one was the best:

Q6600 GO @ 3600
L728A
Water cooled
1.40v load
PK5 deluxe
1 hour blend
OS = XP Pro

meanwhile I changed board --> Blitz formula

...and the results are quite nice

--> nice FSB without much tweaking

--> max spi 1M ...for now..

**nonvtec** · 10-29-2007, 10:06 PM

1) Q6600 G0
2) L734A621

5) Thermalright ultra 120 Extreme
6) 1.50v in the BIOS (see screenshots)
7) Asus P5E

**Xevipiu** · 10-31-2007, 01:54 PM

1) Q6600 G0
2) Week: L727A829
3) CPU-Z Validation : http://valid.x86-secret.com/show_oc.php?id=257259
4) 3.6 Ghz;Prime 95 stable.
5) Air
6) Voltage: Was set at 1.4 in bios, 1.38v reals
7) Asus P5K-E.

**WiTcHkInG** · 11-13-2007, 09:55 AM

1) Q6600 G0 - 450x8 @ 3600
2) L725B020
3) Edit later
4) Load and Idle pics Attached
5) Water - Swiftech appogee gt
6) 1.465v
7) Asus P5K Deluxe

Load

Idle

**Devious** · 11-16-2007, 03:38 AM

CPU - Q6600
Revison - G0
FPO# - L737B186
Clockspeed - 4014
Vcore - 1.504
Vid (core temp) - 1.2125
Motherboard - Asus P5K Premium
Cooling - Custom Water
http://valid.x86-secret.com/show_oc.php?id=269735

**miahallen** · 11-17-2007, 03:16 PM

Originally Posted by CraptacularOne

So here's the deal, give me....
1) Post your CPU model & Core revision (B3 or G0)
2) Week (L726A...ect)
3) CPU-Z Validation
4) Screen shot of it running at that speed (orthos, prime95..ect) 100% load
5) Cooling being used
6) Voltage
7) Motherboard used (this is optional but helpful just the same

)

1) Q6600 G0
2) L727B159 - pack date 09/08/2007
3) CPU-Z #269514
4)

5) Zalman CNPS9700
6) 1.50V (BIOS) - 1.44V (with vdroop)
7) Gigabyte GA-P35-DS4 Rev.2.0

3.8GHz here I come!

**rbsmontemor** · 11-17-2007, 08:12 PM

New CPU: (New BD entry plz :P)

Q6600 G0
L726A822
Vcore 1.58v
D-tek Fuzion - MCP655 - MCR320
P5K Deluxe

Rbs.

**noosphere** · 11-19-2007, 07:58 PM

Originally Posted by Cordovader

1) QX6850 G0
2) L723A658
3) http://valid.x86-secret.com/show_oc.php?id=242768
5) Thermalright Ultra 120 eXtreme
6) 1,3625v in bios, 1,336v idle, 1,328v full load
7) Asus Blitz Formula

4)

And some non daily oc

Air

LN2

I M8,

Could you post here the setting in Bios when you have 3600.. please! I have some problems to reach at 3600 with my Q6600 ( VID 1.3500V )

Regards

noosphere

**miahallen** · 11-19-2007, 09:04 PM

Originally Posted by noosphere

I M8,

Could you post here the setting in Bios when you have 3600.. please! I have some problems to reach at 3600 with my Q6600 ( VID 1.3500V )

Regards

noosphere

Probably becasue 1.35V isn't enough for your Q6600. Notice, he's running a QX6850 which will usually get to higher clocks...or equal clocks with less voltage.

**bl1zZ** · 11-21-2007, 05:45 AM

Jinu can you send me a memset screenshot of your 4.3ghz run?
It'd be interesting to know a few settings...
I'm hangin at 4ghz 1.43v with phase (but it seems to be that my mainboard could be the prob too

)

**jinu117** · 11-22-2007, 12:11 AM

Can't do bl1zZ :P Basically CPU is back to RunMC so he can do his testing of things. What I remember is that I just set memory pretty lenient per specification. Voltage I tested I think was also MUCH higher than what you were doing (well, I make systems that can handle it obviously :P) so it was not finess but brute force method of getting the overclock. I really don't have too much time to tinker and learn each new mobo/cpu combination of overclock and it was for quick run to figure out how much heat dump current (well previous gen now) CPU generates under extreme condition

**adidassler** · 11-22-2007, 01:18 AM

Hey guys, i just want to know what is the marking outside the box of a G0 Intel QX6850 because i am going to buy this week... but i dont know which one is to pick, i want the G0 stepping, kindly post pics or any related QX6850 G0 Steppings?

Thanks and Regards

**~aoe~** · 11-22-2007, 03:31 AM

The QX6850 is only available as G0 stepping. Check out Processor Spec Finder on the Intel website. The sSpec# will be SLAFN on the box.

**adidassler** · 11-22-2007, 04:40 AM

@aoe

Thanks man... Now i know.. haha

**Nazu** · 11-23-2007, 02:38 AM

1) Q6600 G0 @ 3.6GHz
2) L730B304
3) http://valid.x86-secret.com/show_oc.php?id=271714
4) Prime95 small fft's. http://koti.mbnet.fi/nazu/Kone/4h%20prime.jpg
5) Air. Xigmatek HDT-S1283
6) 1.52v from bios. Drops to 1.49-1.50v under load
7) MSI P35 Neo2-FIR

**GOZ** · 11-23-2007, 05:09 AM

I just got a 737A669 pack date 10/18/07, haven't seen one like that yet they seem to be like 737BXXX..........

Anyone seen any close to this?

won't get the rest of my parts till monday....

**gastoncapo** · 11-26-2007, 04:50 PM

i got a L734b252 oem from ebay last week..but im still waiting for some parts to build my system, i'll keep u updated!! this seems to be a new batch

Thread: Quad Core OC Database

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions