Quote Originally Posted by SVakaTOR View Post
Hi there everyone! Im going to OC my q6600 from stock to 3000Mhz. And this is what I going to do:
1) AI OC -> Manual
2) CPU Ration Control -> Manual
3) FSB Frequency -> 333
4) PCI Frequency -> 100
5) Dram Frequency -> 1067
6) Dram Command Rate -> 2T
7) Dram Timings Control -> Manual
8) Dram Timings -> 5-5-5-15
9) CPU Voltage -> 1.35 (?)
10) Dram Voltage -> 2.2
11) FSB Term Voltage -> (?)
12) NB Voltage -> (?)
13) SB Voltage -> (?)
14) C1E -> Disable

Can you please check if I am missing something or something is not correct coz this is my first OC . Also Im not sure and simply dont know what to put instead (?). Thanks.
CPU Voltage 1.35 might do it, you may need to adjust. Set FSB Term to 1.4v, NB Voltage to 1.49-1.55(whatever makes it stable, start at 1.49v) SB - 1.125v should do it.

Also set CPU GTL Ref - .63x and NB GTL Ref- .63x or .67x whichever lets it boot, then stress test, if you get errors check your voltages this one like my board may need to goto .67x with quad and however much RAM you have.