ASUS P5W DH - Problems + Fixes Thread

[crishan]

@dragons_nl and Snake_Eyes:

Are you aware of something called a search function?

Specifically that button on the upper right side of this page labeled
Search this Thread?

Why don't you use that?

You think i go read 253 pages of this tread ?

Sheesh. Really. Is it our fault you are too lazy for searching and r e a d i n g?

[riiaku]

I'm still using 1503, its been running smooth for a long time but i have some sound problems in vista with games, i read in other forums that updating my bios would do the trick.

My question is what is the most stable bios out of all of these that would maintain my 3.2 gigahertz overclock of my core 2 duo 6400 and also be stable with no bugs? Or hopefully allow me to push to a higher overclock if possible. I'm using OCZ Platinum Revision 2 2GB DDR800 PC6400 ram. It wont boot even if i go one megahertz past 400, so yeah. Can anyone please lend a helping hand?

EDIT: just tried the 2004 mod bios, booted up ran load setup defaults, did not clear cmos though, but still runs great. I went into bios set up my overclock options and it runs awesome, all i gotta do now is run it with games and see if it solved the problem, vista needs a lot of work.

What is memory remap feature and what is better for OCing disabled or enabled. what is dram throttling too? do i need it? and what about the CPU thermal control what would that do if i disabled it. sorry for all the questions guys its just i always wondered if i really needed these options or not and what they did.

[Brahmzy]

I'm still using 1503, its been running smooth for a long time but i have some sound problems in vista with games, i read in other forums that updating my bios would do the trick.

My question is what is the most stable bios out of all of these that would maintain my 3.2 gigahertz overclock of my core 2 duo 6400 and also be stable with no bugs? Or hopefully allow me to push to a higher overclock if possible. I'm using OCZ Platinum Revision 2 2GB DDR800 PC6400 ram. It wont boot even if i go one megahertz past 400, so yeah. Can anyone please lend a helping hand?

EDIT: just tried the 2004 mod bios, booted up ran load setup defaults, did not clear cmos though, but still runs great. I went into bios set up my overclock options and it runs awesome, all i gotta do now is run it with games and see if it solved the problem, vista needs a lot of work.

What is memory remap feature and what is better for OCing disabled or enabled. what is dram throttling too? do i need it? and what about the CPU thermal control what would that do if i disabled it. sorry for all the questions guys its just i always wondered if i really needed these options or not and what they did.

I'm in the EXACT same situation as you. I've had 1503 running for a LONG time now (since it came out) with a nice stable E6600 @ 3.4/3.6GHz OC. I don't wanna mess that up, but I'm going to be installing Vista x64 this weekend and want to make my box is "ready."

Should I just stick wih 1503?

[lawrywild]

I'm in the EXACT same situation as you. I've had 1503 running for a LONG time now (since it came out) with a nice stable E6600 @ 3.4/3.6GHz OC. I don't wanna mess that up, but I'm going to be installing Vista x64 this weekend and want to make my box is "ready."

Should I just stick wih 1503?

Why not try it first?

If you get problems use 1707 or official 2004.

[TrancëJay]

Sorry if this was already asked. Does this MoBo support Yorkfield?

[curvie]

Sorry if this was already asked. Does this MoBo support Yorkfield?

I believe BIOS 2302 will enable support for 45nm cpus per this page.

[J.A.]

My adventure with this motherboard:

I have this motherboard with the below setup for over a year now. The CPU is overclock to 3GHz and fully stable (with increase NB voltage, but I don’t remember by how much offhand).

One day (few months ago) my system was acting weird so I open it up to see what was wrong with it. Turn out one of the hooks that hold the NB cooler in place had completely broken off and cooler was just dangling there and not making contact with the chip. I superglued the hook back on, but it was too weak to hold the CL-C0034 in place, so I had to put the original NB cooler back on.

Few weeks after that the top PCIEx16 slot malfunctioned, so I had to move my video card (Sapphire Radeon X1900 XT 512MB) to the bottom slot, but not long after the video card died completely (tested with 3 different systems and monitors).

Bought a 7600GT to replace and just few days ago the 7600GT is also dead. Now here’s a nub question: can overclocking the CPU with increase NB voltage kill or shorten the lifespan of video cards? The video cards were not overclocked.

It's either that this mobo is shortening the lifespan of the graphic cards I put in it or I am just very unlucky.

I'm about to buy the 88000GT and now I'm unsure about putting it in this MB. Any suggestions?


Thanks.

---

Specs:
Antec P180 Case
Intel E6600 @ 3GHz
Corsair Twin2X2048-PC2-8500C5
Tuniq Tower 120
Seasonic S12 600W
Jing Ting JTS0006 chipset cooler for SB
Thermaltak CL-C0034 chipset cooler for NB