Quote Originally Posted by kingfearon View Post
Hey got my ip35e a few weeks ago with a e6750 and balistics 8500, does anyone know how to work the fan control(Bios/EQ) its a bit confusing, also what should i do before setting up for overclocking, mem timeings, volatge, what to disable etc..

contact me on messanger if desire, much appreciated..
first off, if your using a fan with a 4pin header then leave the setting "CPU FAN Type" at default (4pin) otherwise change it to 3pin.

FanEQ Target Temp is just that, what temp do you want the fan to start kicking in, ie. i set mine to 45C.

FanEQ Temp. Tolerance is range around the Target Temp, ie. mine is set to 5C. so within 5C of 45C, the fan will start to spin faster and once temp reaches 45C, fan will be spinning its max depend on the Start Control setting.

FanEQ Start Control is what % of the fan you want it to spin at when it reaches the Target Temp, ie. mine is set to 100%

FanEQ Stop Control is what % of the fan you want it to spin when its out of the Tolerance range, ie. min is set to 60%. so when you setting idle, your fans are spinning slower = less noise.

fyi: i have a low speed yate loon as my cpu fan.

the manual doesn't do a good job of explaining it so i hope this helps.